Leica SL (Typ 601) Camera Firmware 3.3
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: 601__33_.lfu.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Power Saving Mode:
– Changed functionality: While not using electronic Viewfinder or any operating elements, the camera will go into ‘Auto Power Off’ after a fixed amount of time.
– Changed the timing from 3 to 10 seconds.
Auto Review:
– Additional option ‘Shutter pressed’ has been added to Auto Review settings
– Option ‘Off’ no longer enables the camera to show Auto Review while shutter release is pressed.
Please follow these steps to install the new firmware for your Leica SL camera:
– Recharge the battery to 100% and insert the battery into the camera.
– Download the new firmware file to your computer.
– Prepare the installation SD card.
– Please make sure that the card contains at least 200 MB of free disk space.
– It is recommended to format the card inside the camera before continuing with the installation process.
– Copy the firmware file to the root directory of a SD card.
– Insert the SD card into the camera and switch it on.
– Before installing a new firmware, please backup your user profiles. The installation will override your personal settings and customizations stored inside the camera.
– Go to MENU / SETUP / User Profile
– Choose «Export Profiles» and confirm to start the process
– The camera will confirm the action with the screen «Export Successful.»
– Go to MENU / SETUP / Camera Information / Firmware
– Press “Start Update” and confirm to start the process
– Please wait until it’s done.
– Restart the camera
– In case you have done a backup of your user profiles: Go to MENU / SETUP / User Profile, choose «Import Profiles» and confirm to start the process
– The update process is completed.
CAUTION:
– Please do not turn off your camera, or do not remove the SD Memory Card, do not remove the lens while updating your camera’s firmware.
– DISREGARDING THIS ADVICE CAN CAUSE SERIOUS DAMAGE TO YOUR CAMERA!
Descargar