Intel RealSense D430M Depth Module Firmware 5.9.2 para Windows 10 64-bit
Tipo de archivo: Firmware.
Sistema Operativo: Windows 10.
Nombre del archivo: Signed_Image_UVC_5_9_2_0.bin.
Bit: 64 Bit.
Licencia: Gratuito.
Descripción
Device Firmware Update Tool (DFU) for Intel RealSense is a command line tool for updating D400 series camera firmware. The tool is designed to install specific signed firmware .bin files provided by Intel.
In order for Windows 10 to recognize D400 Series devices and install correct drivers, all Windows Updates must be applied prior to plugging in the D400 Series camera to Windows Host System.
DFU Tool Steps
– Install Windows 10 on PC with USB 3 port.
– Copy and paste DFU tool and corresponding D400 series firmware .bin files to Windows 10 host. Note what directory files are stored.
– Open to DFU Tool directory; and right click RS400DfuConsole.exe and choose, Run as administrator. You can also open a command line as admin and run the RS400DfuConsole.exe from there.
– Plug D400 series camera into Windows 10 Host system via USB 3 cable into USB 3 port. Command line window should appear with main menu of tool being displayed. Press 2 then [ENTER] to display a list of updateable cameras.
– Notice a list is produced in command line window; press 1 [ENTER] to select D400 series camera and begin firmware update process.
– Prompt asks user to input file path of firmware .bin file. Type the full file path with firmware filename included and press [ENTER].
– Notice output of downloaded bytes transmitting, this process takes about 3 minutes until completion.
– When firmware upgrade is complete, the camera will reset. A windows icon saying Device is undergoing additional setup should pop up. The main menu will appear again.
– Verify the firmware version installed on camera by pressing, 3 and [ENTER].
– Notice the firmware version has changed on the connected Intel RealSense Camera.
Descargar