Intel R1304RPMSHOR Server System EFI Firmware 03.04.0002P
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: S1200V3RPO_S1200V3RPL_S1200RPM_EFI_BIOS03040002_BMC12010847_FRUSDR108.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Versiones:
– BIOS: R03.04.0002
– ME: R03.00.07.024
– BMC: 01.20.10847
– FRUSDR: 1.08
BIOS Changes in 03.04.0002:
– NOTICE: Capsule update method: If previous BIOS version is R02.02.0004 and earlier version, need use HSW/HSW-R CPU part boot to EFI shell, and use capsule files update BIOS to R03.03.0006 and update ME to 3.0.7.24,then replace with BDW CPU part to power on.
– NOTICE: ROM update method: Need use DediProg programmer to flash SPI chip.Please load ROM file(RB_03.04.0002.ROM) from release package.
– EPSD100254944: Fail to boot from DOS bootable USB key after hot plugging Zepher with payload
– EPSD100254271: SWSMI communication buffer not been checked before consumption
– EPSD100253274: Don’t show BIOS password prompts when press F12 to network boot on the reboot the POST message “Press <F2> to Enter Setup, <F6> Boot menu,<F12> Network Boot”
– EPSD100253276: SUT boot first boot device directly without Bios password prompt when press F6 on the reboot the POST message “Press <F2> to Enter Setup, <F6> Boot menu,<F12> Network Boot”
– Add patch to onboard LAN wake up from S5 automatically.
ME Changes in 03.00.07.024:
– Fixed: Platform does not go to S3/S4 state in recovery mode
– Fixed: Wrong value returned from Get Max Allowed Logical Processors command after S0->(S4,S3)->S0 transition
BMC Changes in 01.20.10847:
– Update RKVM, USB and CD media redirection expired certificate
FRUSDR Changes in release 1.08
– Fixed-The sensor reading of P1 MTT is always 0 in EWS(Intel Integrated BMC Web Console)
UEFI iFlash32 Installation:
1. Boot the system to EFI Shell
2. Copy IFlash32.efi, ipmi.efi and BIOS.CAP file to a USB Flash Drive ( Do not use the Rec.CAP file as it will clear the NVRAM) Notes: It is recommended to copy full package
3. Map the respective storage device in the system with the command Shell> map -r
4. Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)
5. Run the IFlash32 utility at the prompt fs0:> IFlash32 [File Name] /u /ni
6. Either reboot the system and Go into BIOS setup <F2>, reset defaults <F9> and save <F10> or After the BIOS update and before rebooting, run: fS0:> Iflash32 -rd
7. Reboot the system
Backup BIOS update instructions:
1. Boot the system to EFI Shell
2. Copy IFlash32.efi, ipmi.efi and BIOS .CAP file to a USB Flash Drive ( Do not use the Rec.CAP file as it will clear NVRAM). Notes: It is recommended to copy full package
3. Map the respective storage device in system with the command Shell> map -r
4. Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)
5. Run the IFlash32 utility on the prompt fs0:> IFlash32 -u [File Name] UpdateBackupBios -ni
6. It will update primary BIOS with processed capsule, and the backup BIOS update will be completed in next normal boot.
7. Reboot the system.
Descargar