HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.10
Tipo de archivo: Firmware.
Sistema Operativo: Windows Server 2008.
Nombre del archivo: cp017242.exe.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
The following issues are resolved in this firmware version:
– Fixed an issue where updating iLO 4 firmware could stay at 1% and not complete correctly
– Fixed issue in which fan speed/airflow impedance occurs in certain situations.
– Updated the Factory_Defaults.xml script to include clearing the iLO and IML logs.
– Fixed an issue in which the server would auto power-on unexpectedly when iLO defaults were set using RIBCL.
– The iLO web interface and XML now show N/A for Total Memory Size, Operating Frequency, and Operating Voltage for empty processor sockets.
– Updated SET_HOST_APO.XML to use iLO user permissions.
– Changes to boot order in the iLO web interface and XML scripts now require the Virtual Power and Reset permission.
– Fixed Get_All_Languages.xml to work with CPQLOCFG.
– Fixed an issue where the iLO web interface displays the wrong message for an invalid SID.
– Fixed an issue where Clear_AHS_Data.xml will not execute successfully when AHS is disabled through the iLO web interface.
– The iLO Event Log now logs the name of the user that ran Clear_AHS_Data.XML.
– Fixed the Clear_AHS_Data.xml informational message.
– Removed unrelated VSP messages when running Mod_VSP_Flow_Control.
– Fixed the Set_Server_Name.xml log entry in the iLO Event Log.
– Fixed synchronization issues with the Power Regulator Values in iLO web interface and XML scripts.
– Fixed Get_Network.XML to display correct network information when the iLO 4 configured link is set to Auto.
– Fixed invalid XML response for Get_All_Languages.xml and Get_Language.xml.
– Fixed the Get_EmHealth.xml Storage Controller label.
– Fixed the IRC playback video when the server is powered off.
– Fixed IRC intermittent hang when un-mounting virtual media during a server reboot.
– Fixed the issue that caused an SSH session to disconnect when the IRC Trust Setting is changed.
– Fixed an issue that caused the .NET IRC to prompt for user credentials when started from the iLO web interface.
– Fixed an issue that caused the numeric keypad to work incorrectly in some situations.
– Fixed intermittent Unknown status for System Health, Server Power and UID in the iLO web interface Overview page.
– Fixed an issue that caused a DHCP supplied time zone not to be applied to the time iLO obtained from an SNTP server.
– Fixed a temporary loss of communication with Smart Array firmware which could lead to iLO noting a critical storage condition.
– Fixed an issue in which the server remains to be powered off when issuing a shutdown command (f12 > F2) using ESXi 5.0 U1.
– Fixed intermittent communication issues between iLO and a Smart Array Controller.
– Fixed the iLO web interface System Information page to display correct fan speed and temperatures.
– Various SNMP performance enhancements.
– Reworded the event log message to better identify when non-iLO firmware is flashed.
– Added controlled stepping of fan speed to avoid large fan speed changes that could cause fan failures.
This version adds support for the following features and enhancements:
– Compatibilidad con HP Insight Remote Support 7.0 and later.
– Compatibilidad con Location Discovery Services (ML and DL servers only).
– Compatibilidad con configurable Remote Console hot keys.
– Integrated Management Log enhancements (iLO web interface): Added the ability to change the status of Critical or Caution events to Repaired. Added the ability to add a Maintenance Note to the IML log.
– Added logging for some Smart Array storage events.
– Added a customizable login security banner.
– Added more defined SNMP traps related to the server power state.
– Changed the handling of cache modules in order to not report an error for normal conditions such as cache recharging or logical drive expansion.
– Improved iLO Event Log message when non-iLO firmware is flashed.
– Added CLI performance improvements.
– Added CLI support for adding and removing SSH keys.
– Added manual_ilo_reset to the CLI, which allows network changes without an immediate reset.
Descargar