Gigabyte GA-H61-S3 (rev. 2.0) Intel Rapid Storage Technology 10.6.0.1002
Tipo de archivo: Controlador.
Sistema Operativo: Windows 7, Windows Vista, Windows XP.
Nombre del archivo: motherboard_driver_intel_sataraid_irst.exe.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
CPU
– Compatibilidad con Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package
– L3 cache varies with CPU
Chipset
– Intel H61 Express Chipset
Memory
– 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
– Dual channel memory architecture
– Compatibilidad con DDR3 1333/1066/800 MHz memory modules
– Compatibilidad con non-ECC memory modules
– Compatibilidad con Extreme Memory Profile (XMP) memory modules
* To support XMP memory, you must install an Intel 22nm (Ivy Bridge) CPU.
Onboard Graphics
Integrated Graphics Processor:
– 1 x D-Sub port
Audio
– Realtek ALC887 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
– Compatibilidad con S/PDIF Out
LAN
– Realtek 8111F LAN chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
* Whether PCI Express 3.0 is supported depends on CPU and graphics card compatibility.
– 2 x PCI Express x1 slots
(All PCI Express x1 slots conform to PCI Express 2.0 standard.)
– 3 x PCI slots
Storage Interface Chipset:
– 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
USB Chipset:
– Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 4-pin ATX 12V power connector
– 4 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 2 x system fan headers
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 2 x USB 2.0/1.1 headers
– 1 x clearing CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 1 x serial port
– 1 x D-Sub port
– 4 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller
– iTE I/O Controller Chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System/Power fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 32 Mbit flash
– Use of licensed AMI EFI BIOS
– Compatibilidad con DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Unique Features
– Compatibilidad con @BIOS
– Compatibilidad con Q-Flash
– Compatibilidad con Xpress Install
– Compatibilidad con Xpress Recovery2
– Compatibilidad con EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Compatibilidad con ON/OFF Charge
Bundle Software
– Norton Internet Security (OEM version)
– Intel Rapid Start Technology
– Intel Smart Connect Technology
Operating System
– Compatibilidad con Microsoft Windows 8/7/Vista/XP
Form Factor
– ATX Form Factor; 30.5cm x 19.0cm
Se recomienda siempre usar la versión más reciente del controlador.
No olvide consultar con nuestro sitio tan a menudo como sea posible para mantenerse actualizado sobre los últimos controladores, software y juegos.
Intente establecer un punto de restauración del sistema antes de instalar un controlador de dispositivo. Esto ayudará si instaló un controlador incorrecto. Pueden surgir problemas cuando su dispositivo de hardware es demasiado antiguo o ya no es compatible.
Descargar