Gigabyte GA-EP41-UD3L (rev. 3.3) @BIOS Utilidad B11.1004.1
Tipo de archivo: Utilidad.
Sistema Operativo: Windows 7, Windows Vista, Windows XP.
Nombre del archivo: motherboard_utility_gbttools_gbt_atbios.exe.
Bit: 64 Bit.
Licencia: Gratuito.
Descripción
CPU
– Compatibilidad con Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium processor/Intel Celeronprocessor in the LGA775 package
(Go to GIGABYTE’s website for the latest CPU support list.)
– L2 cache varies with CPU
Front Side Bus
– 1333/1066/800 MHz FSB
Chipset
– North Bridge: Intel G41 Express Chipset
– South Bridge: Intel ICH7
Memory
– 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
– Dual channel memory architecture
– Compatibilidad con DDR2 1066(OC)/800/667 MHz memory modules
(Go to GIGABYTE’s website for the latest memory support list.)
* Because of Intel chipset limitation, please use single-side memory module if four memory modules are to be installed.
Audio
– Realtek ALC888 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Compatibilidad con S/PDIF In/Out
– Compatibilidad con CD In
LAN
– RTL8111C/D(L) chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
– 3 x PCI Express x1 slots
– 3 x PCI slots
Storage Interface
South Bridge:
– 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
– 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
iTE IT8718 chip:
– 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
– Integrated in the South Bridge
– Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 4-pin ATX 12V power connector
– 1 x floppy disk drive connector
– 1 x IDE connector
– 4 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 2 x system fan headers
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x CD In connector
– 1 x S/PDIF In header
– 1 x S/PDIF Out header
– 2 x USB 2.0/1.1 headers
– 1 x power LED header
– 1 x chassis intrusion header
– 1 x clearing CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 1 x parallel port
– 1 x coaxial S/PDIF Out connector
– 1 x optical S/PDIF Out connector
– 1 x serial port
– 4 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
– iTE IT8718 chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System/Power fan speed detection
– CPU overheating warning
– CPU/System/Power fan fail warning
– CPU/System fan speed control
BIOS
– 2 x 8 Mbit flash
– Use of licensed AWARD BIOS
– Compatibilidad con DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
– Compatibilidad con @BIOS
– Compatibilidad con Q-Flash
– Compatibilidad con Virtual Dual BIOS
– Compatibilidad con Download Center
– Compatibilidad con Xpress Install
– Compatibilidad con Xpress Recovery2
– Compatibilidad con EasyTune
– Compatibilidad con Dynamic Energy Saver Advanced
– Compatibilidad con Time Repair
– Compatibilidad con Q-Share
Bundle Software
– Norton Internet Security (OEM version)
Operating System
– Compatibilidad con Microsoft Windows Vista/XP
Form Factor
– ATX Form Factor; 30.5cm x 21.0cm
Se recomienda siempre usar la versión más reciente del controlador.
No olvide consultar con nuestro sitio tan a menudo como sea posible para mantenerse actualizado sobre los últimos controladores, software y juegos.
Intente establecer un punto de restauración del sistema antes de instalar un controlador de dispositivo. Esto ayudará si instaló un controlador incorrecto. Pueden surgir problemas cuando su dispositivo de hardware es demasiado antiguo o ya no es compatible.
Descargar