Gigabyte GA-770T-USB3 (rev. 1.0) Renesas USB 3.0 Controlador 2.0.30.0
Tipo de archivo: Controlador.
Sistema Operativo: Windows 7, Windows Vista, Windows XP.
Nombre del archivo: motherboard_driver_usb3.exe.
Bit: 64 Bit.
Licencia: Gratuito.
Descripción
Presupuesto:
CPU:
– Compatibilidad con AM3 processors: AMD Phenom II processor/ AMD Athlon II processor
Hyper Transport Bus:
– 5200 MT/s
Chipset:
– North Bridge: AMD 770
– South Bridge: AMD SB710
Memory:
– 4 x 1.5V DDR3 DIMM sockets supporting up to 16GB of system memory
– Dual channel memory architecture
– Compatibilidad con DDR3 1666(OC)/1333/1066 MHz memory modules
– Support ECC memory
Audio:
– Realtek ALC888 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Compatibilidad con S/PDIF In/Out
– Compatibilidad con CD In
LAN:
– Realtek 8111D chip (10/100/1000 Mbit)
Expansion Slots:
– 1 x PCI Express x16 slot, running at x16 (The PCI Express x16 slot conforms to PCI Express 2.0 standard.)
– 4 x PCI Express x1 slots
– 2 x PCI slots
Storage Interface:
– 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
– 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
– Compatibilidad con SATA RAID 0, RAID 1, RAID 10 and JBOD
– iTE IT8720 chip: 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394:
– T.I. TSB43AB23 chip: Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a headers)
USB:
– South Bridge: Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
– NEC D720200F1 chip: Up to 2 USB3.0 ports on the back panel
Internal I/O Connectors:
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x floppy disk drive connector
– 1 x IDE connector
– 6 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 2 x system fan headers
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x CD In connector
– 1 x S/PDIF In header
– 1 x S/PDIF Out header
– 2 x USB 2.0/1.1 headers
– 1 x IEEE 1394a header
– 1 x parallel port header
– 1 x serial port header
– 1 x clearing CMOS jumper
Back Panel Connectors:
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 1 x coaxial S/PDIF Out connector
– 1 x optical S/PDIF Out connector
– 6 x USB 2.0/1.1 ports
– 2 x USB 3.0/2.0 ports
– 2 x IEEE 1394a ports
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller:
– iTE IT8720 chip
H/W Monitoring:
– System voltage detection
– CPU/System temperature detection
– CPU/System/Power fan speed detection
– CPU overheating warning
– CPU/System/Power fan fail warning
– CPU fan speed control
Form Factor:
– ATX Form Factor: 30.5cm x 22.0cm
Descargar