Expert Sleepers FH-1 USB MIDI Host Firmware 1.5
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: faderHost.1.5.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Correcciones:
– Added the ability to change settings and perform clock actions via MIDI.
– Scripts are now run whenever a USB device is attached, not just at power up.
– Added the DEV & RST script commands.
– Added portamento for monophonic MIDI/CV converters.
– Added sequencer glide and gate length parameters.
Updating the firmware
The FH-1’s firmware can be updated from a USB flash drive. The process is as follows:
– Descargue el firmware file.
– Unzip the download.
– Copy the file ‘image.hex’ from the unzipped download to the root folder of a USB flash drive.
– Turn off the FH-1 and insert the USB flash drive.
– Turn on the FH-1. It will go through its startup sequence as above. At the stage where LEDs H/8 flash alternately, if the FH-1 finds a USB flash drive with a file named ‘image.hex’ on it, it will proceed to the next step.
– LEDs A-H will flash alternately with LEDs 1-8. This indicates the FH-1 is waiting for your confirmation before proceeding. At this point, spinning the encoder will cancel the upgrade process and the FH-1 will continue to boot its current firmware. To continue with the firmware update, press and hold the encoder for one second.
– When the update starts, LED B will light and LEDs 1-8 will flash to indicate progress. Do not remove the flash drive or turn off the power during the update.
– When the update is complete, the FH-1’s usual boot process will resume.
Descargar