Expert Sleepers FH-1 USB MIDI Host Firmware 1.4
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: faderHost.1.4.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Correcciones:
– Added internal clock generator (bpm-based and tap tempo).
– Added special purpose outputs.
– Added setting to disable tempo-synced LFOs when clock is stopped.
– Fixed a bug in LFO speeds above CC value 120.
– Fixed a bug which caused sequencer A’s outputs to update in response to CCs setting sequencer B’s steps.
– Changed maximum polyphony to 16 (from 4).
– Whitespace in configuration scripts is now ignored.
– Added support for raw MIDI in configuration scripts.
Updating the firmware
The FH-1’s firmware can be updated from a USB flash drive. The process is as follows:
– Descargue el firmware file.
– Unzip the download.
– Copy the file ‘image.hex’ from the unzipped download to the root folder of a USB flash drive.
– Turn off the FH-1 and insert the USB flash drive.
– Turn on the FH-1. It will go through its startup sequence as above. At the stage where LEDs H/8 flash alternately, if the FH-1 finds a USB flash drive with a file named ‘image.hex’ on it, it will proceed to the next step.
– LEDs A-H will flash alternately with LEDs 1-8. This indicates the FH-1 is waiting for your confirmation before proceeding. At this point, spinning the encoder will cancel the upgrade process and the FH-1 will continue to boot its current firmware. To continue with the firmware update, press and hold the encoder for one second.
– When the update starts, LED B will light and LEDs 1-8 will flash to indicate progress. Do not remove the flash drive or turn off the power during the update.
– When the update is complete, the FH-1’s usual boot process will resume.
Descargar