Emerson AMX5000 Analog KVM Switch Firmware 4.0.0.20
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: amx50xx.tar.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Este paquete proporciona los archivos de instalación necesarios de la versión Emerson AMX5000 Analog KVM Switch Firmware 4.0.0.20.
Correcciones:
– Compatibilidad con IPv6. The AMX switches can now be assigned IPv6 addresses and can now be managed via AMWorks software using IPv6. When using this firmware, the following features are not supported.
– User login authentication via LDAP.
– Configuration and Control via SNMP.
– Multicast/UDP subnet discovery when Discovering Devices in AMWorks.
Pasos de instalación:
1. Descargue el firmware file.
2. From your newly installed AMWorks software, select ‘Admin Tools – Network Settings’ and ensure those settings have been configured correctly. Previous versions of the AMX switch firmware only support IPv4. So the AMX switch update must be done via AMWorks software using IPv4. (After the update you can switch to using IPv6 on all AMX switches and AMWorks software).
3. Use the ‘Admin Tools – Add Device’ dialog to discover each AMX switch.
4. In the AMWorks software, select ‘Admin Tools – Firmware Update’ from the menu.
5. Select all of the AMX5000, AMX5010, AMX5020 or AMX5030 switches in your configuration. You must update each type separately.
6. From the ‘Admin Tools – Firmware Update’ dialog, select the update file for the AMX50xx switches.» Make sure you select the file that contains revision 4.0.0.20.
7. Select «Begin Update,» and all firmware updates selected will begin. You may update all of your AMX50xx switches of the same type in parallel, for fastest results. It will take about 5 minutes per AMX50xx switch for the firmware updates to complete.
Descargar