DisplayLink USB Graphics Controlador/Utility 9.3 M0
Tipo de archivo: Controlador.
Sistema Operativo: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nombre del archivo: DisplayLink USB Graphics Software for Windows 9.3 M0.exe.
Bit: 64 Bit.
Licencia: Gratuito.
Descripción
This is the R9.3 product release, the first release of 9.3 driver. It has been put through our full system tests and is suitable for deployment to end-users.
DisplayLink software release 9.3 will deliver:
– DL-6xxx series on Windows 10: alternative encoder for AMD CPU + GPU machines to reduce CPU usage and improve performance
– DL-6xxx: single 4K full screen video playback improvement on Windows 10
– DL-6xxx: interoperability improvements for non-DisplayPort-compliant G-SYNC displays
– Bug fixes
Issues fixed in 9.3 M0 release (9.3.2992.0/9.3.2992.0)
– DL-6xxx series: blank screen and device manager error after rebooting with 5K monitor connected via double DisplayPort link (tiled 5K). (30563)
– All series: device could be disabled in Device Manager in Windows 10 1803 when postponed driver swap (MSI/Setup.exe installation) is not triggered by USB disconnect (30887/30802)
– All series: a rare race condition could lead the driver to terminate when adding display(s) (30894)
– All series: ~once per 250 cycles, device could be in error in Device Manager when resuming from S4 low power mode (29965)
– DL-6xxx series: interoperability improvements for non-DisplayPort-compliant G-SYNC displays (30667)
– DL-4xxx series: device could be showing Code 10 in Device Manager when resuming from S4/S5 low power modes (30682)
– DL-6xxx series: Dell U4320QT @ 1920×2160 may randomly blink/flash on some devices. (30874)
Versiones:
– Software Package Version: 9.3.3015.0
– DisplayLink Ethernet Driver Version: 9.3.2958.0
– DisplayLink Audio Driver Version: 9.3.2958.0
Windows 7 – Windows 8.1:
– DisplayLink Core Software Version: 9.3.2992.0
Windows 10 v1607 Build 14393 onwards:
– DisplayLink Graphics Driver Version: 9.3.2992.0
The DL-3xxx, DL-4xxx (where applicable) and DL-5xxx plus the associated software, is tested to meet the following compliances at the time of release:
– USB 2.0 protocol
– DisplayPort (source 1.2)
– DisplayPort ++
– HDCP 1.x over DP
– HDCP 1.x over HDMI
– HDCP 1.x over DVI
– HDMI (source 1.4)
The DL-6xxx plus the associated software, is tested to meet the following compliances at the time of release:
– USB 2.0 protocol
– USB 3.2 protocol
– DisplayPort (source 1.4)
– DisplayPort ++
– HDCP 1.x over DP
– HDCP 1.x over HDMI
– HDMI (source 1.4 and 2.0)
Devices supported:
– DL-6910 / DL-6950 / DL-6700
– DL-5500 / DL-5700 / DL-5900 / DL-5910
– DL-41xx
– DL-3100 / DL-3500 / DL-3700 / DL-3900 / DL-3950
– DL115 / DL125 / DL165 / DL195
Known Issues:
– When upgrading from R8.1, disconnecting and re-plugging the USB of the product using DisplayLink technology is necessary (25057, 25075)
– Windows 7 requires Microsoft KB3033929 or later installed to validate SHA-256 driver signature hashing. SHA1 has been deprecated (23965)
– Devices with mass storage or auto-install are not supported by Windows 10 UMDF USB driver DisplayLink uses (21959)
– Windows 10 Anniversary Update sets the wrong preferred mode 9124025 (23871)
Para instalar este paquete por favor haga lo siguiente:
– Asegúrese de que se cumplan todos los requisitos del sistema.
– Guarde el paquete descargable en una ubicación accesible (como su escritorio).
– Localice y haga doble clic en el archivo recién descargado.
– Permitir que Windows ejecute el archivo (si es necesario).
– Lea EULA (Acuerdo de licencia de usuario final) y acepte continuar con el proceso de instalación.
– Siga las instrucciones en pantalla.
– Cierre el asistente y reinicie el sistema para permitir que los cambios surtan efecto.
Descargar