Cisco RV130W Router Firmware 1.0.3.14
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: RV130X_FW_1.0.3.14.bin.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Enhancements:
– Support web filtering (only for RV130-WB-K9-NA, RV130-WB-K9-G5, RV130W-WB-A-K9-NA, RV130W-WB-E-K9-G5).
– Support dynamic USB module update.
– Support VLAN tagging on WAN interface.
– Support 100 port forwarding rules.
– Support WAN port mode manual configuration, such as enable, disable, duplex, speed, etc.
– Support variable LAN subnet mask
Issues Resolved:
– Subnet mask limitation. (CSCut19784)
– Cannot create Second VPN Policy with same Local Subnet. (CSCus36164)
– VPN should support one local subnet to multiple remote subnets scenario. (CSCul52397)
– Site-to-Site VPN can’t add more than one remote network. (CSCut27802)
– Backup configuration file failed to restore to Device. (CSCuv07239)
– WLAN to PPPoE WAN throughput is too low. (CSCuv60607)
– DHCP server status incorrect display in dashboard. (CSCut76144)
– Port Forwarding stops working after some time. (CSCut98735)
Caveats Acknowledged in Firmware Version 1.
0.3.14:
– Problem: GUI returns error when choose local VPN IKE ID as IP and remote ID as FQDN. (CSCux87754)
– Solution: Changing the local IKE ID types.
– Problem: Blacklist and whitelist in webfiltering should not be case sensitive. (CSCux72273)
– Solution: Input the lower case to the blacklist and whitelist.
Procedimiento de instalación:
– Guarde el paquete descargable.
– Inicie sesión en la interfaz de usuario web del enrutador.
– Navegue a la sección de actualización de firmware de su unidad inalámbrica.
– Seleccione el firmware actual y configure su enrutador para instalar este archivo.
– Espere a que el dispositivo realice este proceso.
– Reinicie la unidad si es necesario.
Descargar