Casio EX-ZR710 Camera Firmware 1.01
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: EX-ZR710_101.EXE.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Este paquete proporciona los archivos de instalación necesarios de la versión Casio EX-ZR710 Camera Firmware 1.01.
Correcciones:
– FlashAir W-02 Class 10 memory card support
– Do not change the preset wireless LAN startup image. The camera cannot recognize wireless LAN startup if this image is changed to a different one.
Checking your firmware version:
– On your EX-ZR710 camera, hold down the [MENU] button as you press the [POWER ON/OFF] switch to turn on the camera. Keep [MENU] depressed until the version of your camera’s firmware appears on the monitor screen.
– If «VER 1.00» appears, you need to download this update software and install it on your camera.
– If «VER 1.01» appears, it means that your camera already is running the latest firmware version, so you do not need to install this update.
Requirements:
– To install this firmware update on your camera, you must copy it into the root directory (the top directory on the drive) of a memory card. Because of this, you need to have the USB cable (that comes bundled with the camera) on hand or a card slot available on your computer.
Pasos de instalación:
1. Extract the file you downloaded.
2. Connect the camera to its USB cable and establish a USB connection with your computer.
3. Copy the extracted file (EX-ZR710.BIN) to the root directory (the top directory on the drive) on a memory card.
4. Remove the USB cable from the camera.
5. On your camera, hold down the [MENU] button as you press the [POWER] button to turn on the camera. Keep the [MENU] button depressed until the message «PROGRAM UPDATE» appears on the monitor screen.
6. On the «PROGRAM UPDATE» screen, move the highlighting from [NO] to [YES] by pressing. Next, press the [SET] button.
7. This starts installation of the update firmware, which is indicated by the message «NOW LOADING» on the camera monitor screen. The message «COMPLETE» appears when installation is complete.
8. After installation is complete, turn off the camera.
9. Check if the firmware version has been updated.
– If you copied the firmware update file (EX-ZR710.BIN) to a memory card, remove the memory card from the camera. Next, hold down the camera’s [MENU] button as you press the [POWER] button to turn on the camera. Keep [MENU] depressed until the version of your camera’s firmware appears on the monitor screen. If «VER 1.02» appears, it means that firmware update installation was successful.
Noticia importante:
– Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore your camera to its original firmware version.
– If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to make sure the camera’s battery is fully charged before starting the firmware update installation procedure.
– When using battery power for installation, a safety feature makes it impossible to perform installation when battery power is low. Make sure the camera’s battery is fully charged when using battery power for installation.
– After copying the EX-ZR710.BIN software to memory card, disconnect the USB cable from the camera before installing the firmware onto the camera. This firmware update cannot be installed while the USB cable is plugged into the camera.
Descargar