Canon imagePROGRAF iPF650 MFP Firmware 1.38
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: iPF650iPF655V0138.jdl.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Following improvement was implemented for HP-GL/2 print function:
– Priority of HP-GL/2 process task was optimized to improve the network response delay.
– Printing failure due to HP-GL/2 data dividing was modified.
– Printing failure due to HP-GL/2 data combining was modified.
– The failure occurs at printing HP-GL/2 that includes large amount of linear data was modified.
– “Memory overflow” warning display error during long time intermittent printing was modified.
– The failure which fails to finish the job when sending data without end indicator in HP-GL/2 was modified.
– Printing failure which occurs to have non-printed band area over print head width when printing in particular HP-RTL data was modified.
– Solid black printing when communication is disconnected during HP-RTL data printing was modified.
– The handling method of transparent layer in JP-GL/2 data has been improved.
Other Changes:
– The failure which restarts right after power is on when accessing printers through RemoteUI or IPP (Internet Printing Protocol) was modified.
– Panel display error was modified.
– The failure which stops access mediation function when using accounting function in status monitor was modified.
Caution:
– Install the latest Canon imagePROGRAF Firmware Update Tool if it is not installed.
Descargar