Canon EOS 5D Mark III Camera Firmware 1.3.6
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: eos5d3-v136-win.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Cambios:
1. Corrects a PTP communications vulnerability.
2. Corrects a vulnerability related to firmware update.
Procedimiento de actualización de firmware:
– Download the zipped file
– Extract the downloaded file, and create the firmware update file.
– Insert a CF card (or SD card) that has been formatted in the Camera into the card reader.
– Copy the firmware update file to the first window that appears when the CF card (or SD card) is opened (the root directory).
– If the firmware update file is placed in subfolder of the CF card (or SD card), the camera will not see it.
– Remove the CF card (or SD card) from the card reader.
– Insert the CF card (or SD card) with the firmware into the camera.
– Turn the Power Switch <ON>, and then press the <MENU> button to display the menu.
– Rotate the Main Dial and the Quick Control Dial to select the «Firmware Ver.x.x.x» item at the bottom of the “Set-up 5 (Yellow)”, and then press the <SET> button.
– The firmware update screen will appear.
– Turn the Quick Control Dial, select [OK], and then press the <SET> button.
– The screen will appear on the camera’s LCD monitor.
– If you press the <SET> button, a confirmation screen will appear, so check the firmware update shown, rotate the Quick Control Dial to select [OK], and press the <SET> button again to start the firmware update.
– The message will appear during the update.
– The firmware update takes approximately 4 minutes.
– When the update is completed, the message will appear on the camera’s LCD monitor.
– Complete the firmware update by pressing the <SET> button.
– The firmware update is now completed.
– When the firmware update operations are finished, turn the camera <OFF> and remove battery from the camera for at least two seconds. This will cause the new firmware to take effect after the battery has been reloaded and the camera is turned on.
– Format the CF card (or SD card) before using it again.
Verifying the firmware Version:
– Turn the Power Switch <ON>, and press the <MENU> button.
– Rotate the Main Dial and the Quick Control Dial, and you will see the «Firmware Ver.X.X.X» at the end of the settings shown in “Set-up 5 (Yellow)”.
– This is the currently installed firmware version number.
Precaution:
– A power failure during the firmware writing operation may disable the camera.
– Use a fully charged Battery Pack or dedicated AC Adapter Kit (Optional) for the firmware update.
– Do not shut off the power during the firmware writing operation.
– Do not press any camera buttons during the firmware writing operation.
– Do not open the card slot cover during the firmware writing operation.
– Before the firmware update, please remove the lens, external Speedlite, and all other accessories from the camera.
Descargar