Buffalo WZR-900DHP Router Firmware 2.13
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: WZR-900DHP_FW2.13.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
[Bug fixes]
– The LED now lights with the correct color (amber) in wireless bridge mode.
– Fixed the mode button to switch modes continuously.
– Video streams are now all correctly categorized as «Video» by QoS.
– Fixed AOSS not being able to connect by WEP when «Allow WEP for Game Consoles Only» was enabled.
– Fixed Settings not displaying correctly at login.
– Fixed the incorrect wireless channel information displayed in ‘System’
– ‘Wireless Bridge’ when the AirStation was in wireless bridge mode.
– Fixed the problem of PPTP passthrough settings in ‘VPN Passthrough’ not being applied correctly.
– Fixed the problem of some icons on the upper side not working while the ‘Network Devices’ screen was displayed.
– Fixed the AirStation sometimes incorrectly rebooting while BitTorrent was running.
– Fixed the problem of unstable communication with wireless clients using power-saving functionality.
– Improved transmission rate for wireless communication at long range
How to update the firmware:
– Connect the AirStation to the same network as your PC. For best results, connect the AirStation directly to your PC with an Ethernet cable.
– Boot your PC.
– Confirm that the PC’s and the AirStation’s IP addresses are on the same network subnet. Refer to AirStation’s user manual to confirm how to change IP address settings.
– Open a browser and enter «192.168.11.1» in the URL field, then press the enter key.
– Enter «admin» for the username and «password» for the password. Note: If you changed the password, enter the password that you configured.
– Click «Update AirStation Firmware» at the left of the screen.
– Click «Browse» to the right of «Firmware File» and navigate to the firmware file.
– When the update starts, the power LED will blink red. It will take about 6 minutes to finish updating. When it finishes, the power LED will blink green or turn off. Do not disconnect power to the unit while the power LED is blinking red or your AirStation may be damaged.
– To confirm that your firmware is successfully updated, check the version number.
Descargar