Buffalo WHR-1166D Router Firmware 2.70
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: whr1166d_us-270.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Added Features:
– Added new function to enable/disable fast address translation. Fast address translation is a function that improves throughput by using hardware to process network address translation. Enable fast address translation during normal operation. (It is enabled by default.) If transmission rates get slow with certain internet connections, disable it. This setting is for communication between the WAN side and the wired LAN side. Communication between the WAN side and the wireless LAN side will always use fast address translation.
How to update the firmware:
– Connect the AirStation to the same network as your PC. For best results, connect the AirStation directly to your PC with an Ethernet cable.
– Boot your PC.
– Confirm that the PC’s and the AirStation’s IP addresses are on the same network subnet. Refer to AirStation’s user manual to confirm how to change IP address settings.
– Open a browser and enter «192.168.11.1» in the URL field, then press the enter key.
– Enter «admin» for the username and «password» for the password. Note: If you changed the password, enter the password that you configured.
– Click «Update AirStation Firmware» at the left of the screen.
– Click «Browse» to the right of «Firmware File» and navigate to the firmware file.
– When the update starts, the power LED will blink red. It will take about 6 minutes to finish updating. When it finishes, the power LED will blink green or turn off. Do not disconnect power to the unit while the power LED is blinking red or your AirStation may be damaged.
– To confirm that your firmware is successfully updated, check the version number.
Descargar