Buffalo TS-2RZH NAS Firmware 2.53 para Mac OS
Tipo de archivo: Firmware.
Sistema Operativo: Mac.
Nombre del archivo: ts2rz_series-253_fwmac.dmg.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Bug Fixes [System]:
– Fixed a bug where a working HGST hard drive had been erroneously identified as malfunctioning.
Before updating the firmware:
– Please consult your local technical support representative if you experience any problems caused by this firmware update.
– Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.
– USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.
How to Use Updater:
– Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
– Close all applications. Also, stop or exit any firewall software.
– Extract the downloaded file and run setup. When a TeraStation is detected, an update window will open.
– Select the TeraStation to update if multiple TeraStation are connected.
– Click “Update” and enter the TeraStation’s admin password.
– Click “OK”.
– Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
– When the update is complete, a message will be displayed
Descargar