Basler BIP2-640c-dn IP Camera Firmware 3.14.1
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: Firmware Package 3.14.1.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Este paquete proporciona los archivos de instalación necesarios de la versión Basler BIP2-640c-dn IP Camera Firmware 3.14.1.
Corrections:
– No video stream via ONVIF on box cameras. In firmware version 3.14.0, the camera delivered no video stream when requested via ONVIF. This applies only to box camera models, which don’t support audio.
Pasos de instalación:
1. Make sure that the camera whose firmware you want to update is connected.
2. Click the Start Firmware Update button. A Start Firmware Upload dialog box will open asking if you want to continue.
3. Click the OK button. A web page will open asking you to upload the firmware file.
4. Use the Browse button to select the new firmware file that you want to load onto the camera.
a. If you are updating firmware versions 3.8 or higher, select the firmware update file.
b. If you are updating firmware versions 3.7 or before, select the FW-FirmwareUpdateHelper_x.x.bin file.
5. Click the Start Firmware Upload button. A web page will open asking you to verify that the firmware is correct for the camera.
6. Make sure that the firmware is correct and then click the Confirm Update button. A web page indicating the progress will appear. Wait for the update to finish. After about 45 seconds a web page will appear indicating that the update is finished.
7. Click the Return to Web Client button to return to the Basler Web Surveillance Client. If you have updated a firmware version 3.7 or before using the FW-FirmwareUpdateHelper_x.x.bin file, you now need to repeat this procedure starting from step 1 to perform the actual firmware update. This time you have to select the FW-x.x.x.bin firmware update file in step 4.
Descargar