AVTECH AVC704H Recorder Firmware 1022
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: FW%5CDVR4CHHA_1022.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Upgrade Process:
– Save the upgrade files obtained from your installer or distributor in a compatible USB flash drive
– Insert it into the USB port at the front panel.
– Then, click “SUBMIT” to start upgrading.
Note:
– Before using the USB flash drive, please use your PC to format the USB flash drive to FAT32 format first.
– After upgrading firmware, it’s recommended to clear all hard disk data for the system to work more stably. Before clearing all hard disk data, please remember to make video backup.
– Before remote firmware update, please install a hard disk into your recorder first to make sure the firmware update works properly.
Network Upgrade:
– Click “SUBMIT” for perform system upgrade via Internet.
Note: This function requires Internet access. Please make sure your recorder is connected to Internet before using this function.
Backup Config / Restore Config
– To keep the current configurations after upgrade, insert a compatible USB flash drive into the USB port, and select “SUBMIT” in “BACKUP CONFIG” to copy the current configurations to a file “System.bin” and save to your USB flash drive. To restore the configurations, insert the USB flash drive including “System.bin” to the USB port, and select “SUBMIT” in “RESTORE CONFIG”.
Enable Auto Plug and Play
– Switch to “ON” allow the camera to be detected and configured automatically when it’s connected to this device. Note: This function is available only when the brand of the cameras connected is the same as this device
Descargar