Atomos Shogun Studio Controller Firmware 1.16
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: ATOMSGNST_1.16.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
How to update:
– Download the latest version of AtomOS for Shogun Studio and the Controller Update from atomos.com/support.
– Disconnect the power cable from the Shogun Studio.
– Unzip ATOMSGNST.zip and place the file ATOMSGNST.bin onto a USB flash drive. Connect the flash drive to the USB port of the back of the unit.
– NOTE: The USB flash drive must be formatted as FAT32.
– Connect the power cable to the Shogun Studio.
– Near the USB port, a blue LED will begin flashing. It will take a few minutes for the Controller Update to complete. The unit will automatically start up once the update is complete.
– Confirm the update installed correctly by pressing on the Menu button on display unit 1 and go into About Shogun Studio and it will display the version number.
– Power off the Shogun Studio and remove the USB flash drive.
– Unzip ATOMSHS_X.X.zip and copy ATOMSHS.FW onto an SSD.
– Place the SSD into the first unit and power up.
– NOTE: Both units can be updated at once by copying ATOMSHS.FW onto two SDDs and placing them into both caddies before powering up.
– AtomOS will begin updating.
– Remove the SSD before the update is complete and the update file will still be on the SSD.
– Once AtomOS has been updated on unit 1, power down.
– Place the SSD into unit 2 and power up and AtomOS will install.
– Once the update is complete, go the Info page on each unit. The latest version will be displayed on both displays if installed correctly.
Descargar