Atomos Ninja V Recorder Firmware 10.52
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: ATOMNJV_10.52.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Monitor and record RAW over HDMI from the Panasonic Lumix S1H:
– 5.9K ProRes RAW recording in 12Bit RAW up to p30 and loop out in UHD or HD.
– 4.1K ProRes RAW recording in 12Bit RAW up to p60 and loop out in UHD, 4KDCI or HD.
– 3.5K (4:3) ProRes RAW recording in 12Bit RAW up to p30 and loop out in UHD or HD.
– Added the ability to loop out V-log when monitoring or recording RAW from the S1H.
– Playback recorded 5.9K, 4.1K, 3.5K (4:3) ProRes RAW video.
Monitoring of RAW input in:
– Native – Vlog for use with 3D LUTs for monitoring. When monitoring with 3D LUT please use the LUT provided by Panasonic LUMIX Global Customer Support
– Rec709 – to view RAW input in SDR up to 6.7 stops of dynamic range.
– HLG – to view RAW in HLG with up 10.5 stops of dynamic range.
– PQ – to view RAW in PQ/HDR10 with up to 10.5 stops of dynamic range, for scenes with extended spectral highlights.
Additional features:
– 4k ProRes or DNX Video recording in 10bit up to p60 from the Panasonic Lumix S1H.
– Added a warning to let you know when your camera battery is running low, when using camera controls with a supported Z Cam.
– Added the ability to trigger recordings both from the camera and the Ninja, when using the camera controls feature when using a supported Z Cam.
Firmware Update Tutorial:
– Download and unzip the file.
– Copy the file onto a recommended, formatted driver, using the docking station included with your recorder.
– Insert the drive into the Atomos recorder while it’s off.
– Power up the Atomos recorder.
– The screen will show flashing lines of color. This is normal – DO NOT power off!
– Updating will take a few minutes.
– Once completed, the Atomos recorder will power down.
– Power up the Atomos recorder again.
– Check Menu > Product Info > AtomOS Version. This should match the version you have just downloaded.
– Enjoy your updated Atomos recorder !
Firmware Recovery Tutorial:
– Power down the Atomos recorder (Hold power button for 4 seconds).
– Hold down the power button for 10 seconds approximately.
– You will see the “Firmware Update Failed” screen.
– Insert your HDD / SSD.
– The install process will begin and the screen will show flashing lines of color. This is normal – DO NOT power off !
– Once completed, the Atomos recorder will power down.
– Enjoy your updated Atomos recorder !
Descargar