Ubiquiti EdgePoint EP-R8 Router Firmware 1.9.1
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: ER-e200.v1.9.1.4939098.tar.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
New features
– [FW Update] Add automated firmware update check. This is just a first step in providing automated firmware updates and current functionality only checks for update but does not download actual firmware. Complete automatic firmware update functionality will be provided in future release.
Enhancements and bug fixes
– [Web UI] Fix bug when app categories were not showing up in basic queue in safari.
– [Web UI] Fix EdgeOS compromise due to XSS in encoder error handling
– [Web UI] Fix IP address validation bug in “Load Balancing2” wizard
– [Web UI] Fix broken dashboard in Firefox.
– [Web UI] Fix bug when “Basic Setup” wizard with dhcp & vlan generates wrong NAT config.
– [BGP] Fix bug when “ribd” was constantly consuming 10% CPU with full BGP routing table.
– [Routing] Fix random “nsm” daemon crash when multiple interfaces flap simultaneously.
– [Routing] Fix incomplete default gateway when pppoe link fails.
– [Routing] Fix bug when “ribd” was sometimes stuck consuming 100% CPU after link to default gateway failed.
– [Routing] Fix bug when “set ip-next-hop x.y.z.w” route-map CLI command had no effect
– [Routing] Fix bug when “show ip route” CLI command was showing “Network not in table” error instead of default gateway
– [Routing] Fix bug when custom routing tables sometimes were not populated after boot.
– [Routing] Improve memory management in routing daemons (i.e. bgpd, nsm, ribd…).
– [RIP] Fix wrong RIP distance.
– [VPLS] Show VPLS instance expiration time via “show vpls xxx mac-address” CLI command
– [VPLS] Fix kernel crash when VPLS interface loses link.
– [Interfaces] Add VLAN to pseudo-ethernet interface configuration
– [Interfaces] Allow switch0 to be added to br0 on ER-X
– [Interfaces] Add “proxy_arp_pvlan” option to VLAN interfaces
– [Interfaces] Add ipip6 encapsulation to ipv6-tunnel interface
– [Interfaces] Setup default multicast routes over GRE ipv6 PtP links
– [Interfaces] The auto-negotiation of SFP port on ER-X-SFP and EP-R6 is changed to enabled by default.
– [CLI] Add warning message when saving config to non-default location
– [CLI] Change commit-confirm message
– [DHCP] Fix remote command injection through DHCP request
– [DHCP] Fix high CPU load when diffing DHCP lease files.
– [DHCP] Fix garbage output when running “show dhcpv6-pd duid” CLI command on ER-X
– [DHCP] Fix error when DHCP static lease with dot in name (i.e. “lch.cern”) was not written to /etc/hosts and thus could not be resolved by dnsmasq.
– [Firewall] Add vtun6 interface type to mss-clamp6 firewall option
– [Firewall] Fix bug when “show firewall statistics” CLI command ignored ipv6-tunnel interface
– [Kernel] Add fix for CVE-2016-5696.
– [Kernel] Enable “netconsole” on ER-X
– [NTP] Remove deprecated “dynamic” NTP option.
– [IPsec] Fix IPSec over IPv6 conditional expression bug.
– [L2TP] Fix bug when L2TP config was not cleared from ipsec config files after deletion
– [IPsec] Fix bug when VPN configuration disappears after reboot if ‘dhcp-interface’ has no address.
– [UPNP] Fix UPnP2 firewall rules
– [DNSmasq] Fix bug when dnsmasq config becomes corrupted if DHCP server exports static route.
– [LoadBalancing] Fix bug when L2TP interface lost connectivity in load-balancing scenario because connected routes got deleted from load balancing routing tables.
Updated software components
– [Kernel] – Fix CVE-2016-5195 aka “Dirty COW”.
– [PHP] – Upgraded PHP to 7.0.12. Fix: CVE-2016-7418, CVE-2016-7417, CVE-2016-7416, CVE-2016-7414, CVE-2016-7413, CVE-2016-7412, CVE-2016-7411, CVE-2016-7134, CVE-2016-7133, CVE-2016-7132, CVE-2016-7131, CVE-2016-7130, CVE-2016-7129, CVE-2016-7128, CVE-2016-7127, CVE-2016-7126, CVE-2016-7125, CVE-2016-7124
Download