Thecus N2810 NAS Server Firmware 3.02.02.11
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: Thecus_x86_64_FW.3.02.02.11.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
New Features/Changes:
– Add notification for low FAN Speed.
– Add notification via user enable DHCP client & server both.
Function improved:
– Improve LCM backlight auto off function.
– Improve Login icon become gray under certain condition.
– Improve Monitor DISK & NETWORK display.
– Improve N4810 low FAN RPM for certain environment needs.
– Improve performance while RAID5 migrate to RAID6.
– Improve SAMABA server enable & disable.
– Improve ScaleOut add peer page, remove itself & been added peer.
– Improve ScaleOut create volume operation.
– Improve System Failover back task name as data.
– Improve System Failover configured and login page.
Online Auto Download & Upgrade:
– If NAS with Internet access capacity, it is no need to download this file, just: CONTROL PANEL -> CONTROL -> FIRMWARE SETTING -> AUTO UPGRADE-> LATEST->CHECK UPGRADE NOW.
Upgrade firmware:
– Save the downloadable file on your computer.
– Login as admin from web interface to your Thecus NAS with 64bit firmware.
– In the [System Management] menu, choose the [Firmware upgrade] item and the firmware upgrade.
– Press button and select the firmware you downloaded.
– Press [Apply] and the confirm window will pop up. Please select [Next] button twice to confirm the process, and start firmware upgrade. The entire upgrade takes about 3 minutes. After the firmware is upgraded, Thecus NAS will beep for 3 seconds.
– HINWEIS: If your browser is set to cache the screen, please press CTRL-F5 in your browser to reload from server instead of from browser’s cache.
– During firmware upgrade process, you will see a progress bar indicating the completeness.
– HINWEIS: During firmware upgrade process, it is imperative that user do not turn off the power to Thecus NAS or close the browser. This will lead to catastrophic result.
– Just in case, the upgrade process failed, please DO NOT restart or shutdown the NAS. Go back and upgrade the firmware again.
– After the firmware is upgraded, you will see a message ask admin user to reboot. Please reboot to finish the upgrade process.
– After click [Reboot], the system will redirect to [Shutdown / Reboot] page, you may select the NAS to shutdown or reboot.
– HINWEIS: After reboot the Thecus NAS, please go to [System Management > Config Mgmt] to save your configuration. New version of firmware will not work with configuration file from previous versions of firmware.
Download