Sony SRS-ZR7 Wireless Speaker Firmware 3.01
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: SRS16002.UPG.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
This page provides instructions on how to update the firmware for Personal Audio System SRS-ZR7 to version 3.01.
Benefits of Update:
– Added Multi Room function via Google Cast.
– Support music playback from SCMS-T devices via Bluetooth during Wireless Stereo/Wireless Surround Function.
– Improve operation stability.
Update via USB Storage Device Instructions:
– The update process usually takes about 10 minutes to complete.
– Ensure that the power cord is securely connected to the AC IN jack of the speaker, and plugged securely into a wall outlet.
– Press the Power/-PAIRING button to power on the speaker.
– Once the Power/-PAIRING button light is on, insert the USB storage device into the USB slot on the rear of the speaker.
– Press and hold the UPDATE/WPS and FUNCTION buttons for at least 4 seconds until beeps are heard. After the beeps are heard, the UPDATE/WPS button lights up.
Note: If you are connected to the network, the UPDATE/WPS button may already be lit in orange, please continue the process
– When the latest software update starts, the UPDATE/WPS button flashes.
Note: The speaker is not operational while the system is updating
The blinking interval and status of the UPDATE/WPS button changes according to the update progress.
– The UPDATE/WPS button automatically turns off and the speaker switches to standby or BLUETOOTH/Network standby mode after the update is complete.
Note: The UPDATE/WPS indicator will flash three times the first time you turn on the speaker after the update.
– Check the current software version to confirm that the update has successfully installed.
Note: If the version number is 3.01, the software update was successful
en the latest software update starts, the UPDATE/WPS button flashes.
Download