Samsung BD-P1600 Blu-ray Player USB Firmware 2.22
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: BEv2.22_120626_BDP1600_XAA.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Dieses Paket enthält die erforderlichen Installationsdateien der Samsung BD-P1600 Blu-ray Player USB Firmware 2.22 (USB Type).
Fixes:
– Improves specific BD title’s playback compatiblity
Prepare the usb flash driver:
1. Download the newest firmware file onto your computer.
2. If the firmware file is compressed (*.zip), the file should be uncompressed to RUF file (*.ruf).
3. Connect a USB flash drive to your computer.
4. If there are previous versions of RUF file on USB flash drive, delete them.
5. Copy the new RUF file to USB flash drive.
Installationsschritte:
1. Remove any Disc, the display should read “No Disc.”
2. Insert USB flash drive into the USB Host jack.
3. Please wait while verifying.
4. After sometime, you will see “Yes/No” menu.
5. Press the ‘Enter’ button to choose ‘Yes’ if the version is a later version than the current one.
6. Wait about 2~3 minutes. When finished, the power will turn off automatically.
7. Remove the USB flash drive.
8. If this is the first time this player is upgrade by CD or USB flash drive, proceed to Step 9. Otherwise, upgrade is COMPLETE.
THE STEP BELOW IS NECESSARY ONLY FOR THE FIRST FIRMWARE UPGRADE.
9. Turn on the Power.
10. Select Menu LANGUAGE.
11. Repeat from Step 1 to Step 7.
The Current Version and New Version in Step 5 may be identical. Please select Yes to complete Firmware upgrade.
Wichtiger Hinweis:
The following events may interrupt the upgrade process and may result in permanent damage to the unit:
– Unplugging the power cord
– Power Outage
Download