Ricoh GR III Camera Firmware 1.30
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: gr3_v130.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Add the following enhanced features:
– [Cross Processing] has been added to [Image control] of the [Image Process Setting] menu in the [Still Image Settings].
– [Cross Processing] has been added to [Image control] of the [Image Process Setting] menu in the [Movie Settings].
– [Crop] and [Touch AF] can be registered to [ADJ Mode Setting] of the [Customize Control] menu in the [Customize Settings].
– [Touch AF] can be registered to [Fn Button Setting] of the [Customize Control] menu in the [Customize Settings].
Improved Contents:
– Improved the AF performance of [Macro Mode] in dark places and low contrast.
– Changed to take over as the initial value after the next time when developing with [JPEG Recorded Pixels] setting changed in RAW development.
– When preparing to shoot with the shutter button, change the point that the electronic level is hidden by the guide display.
– Improved stability for general performance.
How to check version:
[1] Turn ON the camera.
[2] Press MENU/OK button and press Fn1 button.
[3] Press WB button to display [Set-up ] menu screen.
[4] Press flash button and Select [Confirm Firmware Version].
[5] Press flash button.
[6] The firmware version for camera is displayed on the [Confirm Firm Version] screen.
Preparation of update:
– Blank, formatted SD card (16MB or more)
– USB cable, if you are copying the firmware update file to the SD card by connecting the camera directly to your computer.
– SD card reader or a computer with a SD card slot, if you are copying the firmware update file to the SD card using a memory card reader / writer.
– Fully charged battery
– If the camera turns off during updating due to lack of battery power, the camera will become inoperable. If this happens, a charge will be made for repairs even if within the warranty period.
Updating Procedure:
– Provide a formatted SD memory card for the update software.
– The download file is self-extracting.
– Copy the Firmware file to the root directory in the SD card.
– If your computer does not have a card slot, you can copy the firmware update file by inserting the SD card into your camera and then connecting the camera directly to your computer.
– Insert the battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
– Insert the update SD card into the camera and close card cover.
– Turn the camera power on.
– Press MENU button and press Fn1 button.
– Press WB button to display [Set-up] menu screen.
– Press flash button and Select [Confirm Firmware Version].
– Press flash button
– Current version and new version will be displayed.
– If firmware file is not saved to SD card correctly, this screen will not be displayed.
– Select [Yes] and press MENU/OK button.
– The firmware update will start.
– Do not turn OFF the camera while updating.
– When update is completed, “Firmware update complete” will be displayed
– Press MENU/OK button then remove the SD card from camera.
– Confirm the version of firmware with above [How to check version].
Caution:
– When updating is finished, the update SD card still contains the Firmware file.
– If you want to use this card to take pictures, format the card by the camera to delete firmware file first.
Download