Point Grey Flea3 GigE Camera Firmware 1.26.3.0
Dateityp: Firmware.
Betriebssystem: AnyOS, Windows Server 2008.
Dateiname: FL3-GE-1.26.3-00-UG2.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Fixes:
Resolved Issues:
– 19604 – Bayer tile corruption when there are other packet communication on the camera ethernet (ICX274)
ERRATA LIST (list of known issues with this version):
18715 – Cisco Catalyst 2960-S Ethernet Communication Unreliable
Firmware update:
1. Install FlyCapture2 for either windows or linux.
2. Plug your camera(s) in. Cameras must show up in FlyCapture2. If they do not show up, install FlyCapture2.X and the associated drivers (if applicable) and ensure cameras are visible in FlyCap2 demo.
3. Run UpdatorGUI2.exe or UpdatorGUI3.exe (depending on version of FlyCapture2.X) installed in your bin/bin64 folder:
On 32 bit Windows: C:\Program Files\Point Grey Research\FlyCapture2\bin
On 64 bit Windows: C:\Program Files\Point Grey Research\FlyCapture2\bin64
4. Select the camera(s) to update, point to the .ezm2 file downloaded with this package, and select „Update“.
Camera(s) should now be updated. Please note a power cycle of the cameras should not be required, as they are automatically rebooted after firmware update.
Download