NVIDIA SHIELD Tablet K1 Recovery OS Firmware 1.5.0
Dateityp: Firmware.
Betriebssystem: .
Dateiname: nv-recovery-sb-na-wf-1.5.0.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
This is the stock recovery OS for Software Upgrade 1.5.0 of the NVIDIA SHIELD TABLET K1 (WiFi only). Flash this image to your device to return the device to its stock state. This OS image runs Android Marshmallow.
HINWEIS: Do NOT attempt to install this OS to an original SHIELD TABLET 8. This is for a SHIELD TABLET K1 ONLY!
This update for SHIELD Tablet K1 contains important system enhancements & bug fixes, including:
– Conformity with Vulkan 1.0.1.0 CTS
– Fixed boot loop issue with certain SD cards nearing their capacity limit
– Fixed Android Privilege Escalation Exploit (CVE-2016-5195)
– Overall stability and security improvements
SHIELD TABLET RECOVERY IMAGE FLASHING INSTRUCTIONS
– To follow the instructions you will need adb and fastboot.
– These tools are provided as part of the Android SDK.
– Before flashing this recovery image to your SHIELD TABLET, connect your SHIELD TABLET via USB to the PC where you downloaded this recovery image.
– Next, put your SHIELD TABLET into fastboot mode using one of the following methods:
SW method:
– Boot to android home screen
– Connect the device to linux/windows system
– Open terminal (on linux); command prompt (on windows).
– Type „adb reboot bootloader“ in terminal/command prompt
HW method:
– Turn off the device
– Press „Volume Down“ -> „Power“, hold „Volume Down“ and leave Power buttons till device boots
To flash this recovery image to your SHIELD TABLET, run the following commands from the directory where you extracted the recovery image package. If this is the first time you have done this procedure, you must unlock the bootloader (see below):
– fastboot flash recovery recovery.img
– fastboot flash boot boot.img
– fastboot flash system system.img
– fastboot flash userdata userdata.img
– fastboot flash staging blob
Unlocking the Bootloader:
– Your SHIELD TABLET may have shipped with a locked bootloader. To update the device, you must unlock the bootloader using the following: fastboot oem unlock, Press the „Volume Down“ button to select „Unlock bootloader“ option on device, Press the „Power“ button to confirm the unlock. Your device’s bootloader is now unlocked.
Download