Nikon WR-1 Wireless Remote Firmware 1.03 für macOS
Dateityp: Firmware.
Betriebssystem: Mac.
Dateiname: F-WR1-V103M.dmg.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Änderungen:
– In support of the NIKKOR Z 58mm f/0.95 S Noct lens, the product can now be used to set aperture to, and to display an aperture of, f/0.95.
WR-1 firmware updates can be performed with:
– Z 7 and Z 6 cameras
– D5, D4S, D4, Df, D850, D810A, D810, D800, D800E, and D750 cameras
– D500, D7500, D7200, and D7100 cameras
– Other cameras cannot be used to upgrade WR-1 firmware.
– Firmware upgrades can be performed for you by a Nikon-authorized service representative.
Viewing the WR-1 Firmware Version
On the Camera
– Attach the WR-1 to the camera and slide the Tx/Rx/OFF switch to Rx.
– Schalten Sie die Kamera ein.
– Press the camera MENU button and select Firmware version in the SETUP MENU.
– Check the WR-1 firmware version (“W”).
– Schalten Sie die Kamera aus.
On the WR-1
– Slide the Tx/Rx/OFF switch to Tx or Rx.
– Press MENU and highlight VERSION using the multi selector.
– Check the firmware version.
– Slide the Tx/Rx/OFF switch to OFF.
Updating the Firmware:
– Erstellen Sie einen Ordner auf der Festplatte des Computers und benennen Sie ihn wie gewünscht.
– Download the file to the folder created.
– Run the package to extract the following folder named “WR1Update”.
– Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.
– After attaching the WR-1, insert the memory card into Slot 1 on the camera, turn the camera on, and slide the WR-1 Tx/Rx/OFF switch to Rx.
– Wählen Sie Firmware-Version im SETUP-MENÜ und befolgen Sie die Anweisungen auf dem Bildschirm, um das Firmware-Update abzuschließen.
– Wenn das Update abgeschlossen ist, schalten Sie die Kamera aus und entfernen Sie die Speicherkarte.
– Vergewissern Sie sich, dass die Firmware auf die neue Version aktualisiert wurde.
Download