NETGEAR GSS116E Switch Firmware 1.6.0.9
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: GSS116E_V1.6.0.9.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
New feature:
– Added a new column to Port Status to display “Max MTU” supported by the device
Modification:
– Changed Web GUI page title from “NETGEAR ProSAFE Click Switch” to “NETGEAR GSS116E”
– Changed production description from “ProSAFE 16-Port Gigabit Click Switch“ to “16-Port Gigabit Ethernet Smart Managed Plus Click Switch” on the Web GUI
– In the help section of web GUI, the links to Documentation and Support now point directly to the product support page
Security Fixes:
– PSV-2018-0542
– PSV-2018-0612
Bug Fixes:
– Invalid combinations of IP and mask are accepted with access control list
Upgrade Procedure:
– Download the new firmware and unzip it to the file to extract the switch firmware image.
– Download NETGEAR GSS116E Switch Configuration Utility.
– Decompress and install the ProSAFE Plus Utility.
– Connect your computer to the same network as your GSS116E switch.
– Double-click the ProSAFE Plus Utility icon. The configuration home page displays a list of Web Managed (Plus) Switches on the network.
– Select the GSS116E switch that you want to upgrade the firmware on.
– When prompted, enter the password for the GSS116E switch in the password field.
– The default password is password.
– Select System > Maintenance > Firmware Upgrade.
– The Firmware Upgrade page displays.
– Click the BROWSE button to locate and select the firmware file on your PC.
– Click the Apply button.
Warnung:
– Do not interrupt the network connection while in progress. Do not disconnect the Ethernet cable or power off the unit until the process is complete. The update may take several minutes even though you may not see any activity on the screen.
– When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.
– Once the new firmware is successfully loaded (onto the switch), your GSS116E will automatically reboot itself. Wait at least 1 minute for the reboot to complete.
– Open a web browser and enter the IP address of the GSS116E into the address bar and log in to the switch management GUI.
– You are going to be prompted immediately to update the bootloader. Click the BROWSE button and select the new bootloader code from the location on your computer where you unzipped the firmware files.
– Click the APPLY button.
– Warning: Do not interrupt the network connection while in progress. Do not disconnect the Ethernet cable or power off the unit until the process is complete. The update may take several minutes even though you may not see any activity on the screen.
– When the new bootloader code is successfully loaded (onto the switch), your GSS116E will automatically reboot.
Download