MOBOTIX D10 Network Camera Firmware 2.2.1.10
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: M10_upgrade_de_2_2110.mpl.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Fixes :
– Under certain circumstances, the camera disabled the Obscure Image Area (OA) function:
– This error occurred only when Obscure Image Area had been enabled and the configuration had been changed (right/left lens, resolution, zoom/panning, softbuttons, etc.) while the specified time table had deactivated the function. After that, it was impossible to reactivate the Obscure Image Area function. Reactivating was only possible if a configuration change was taking place at a time when the time table had activated the Obscure Image Area function. This bug was part of all releases of MOBOTIX cameras M10/D10/V10 since software version M10-2.0.
– The Java applet for the live image (Browser Quick Control) did not show the live images properly any more.
– It is now again possible to delete the default route in the Ethernet Interface dialog.
– If the NTP time server in the Time and Date dialog had been set using a host name (i.e. not an IP address) and the DNS server was not reachable, the camera stopped booting and initiated a reboot.
– If the NTP server had been used in conjunction with ISDN data dial-out, but ISDN data dial-out had not been set as default route, the camera stopped booting and initiated a reboot.
– The second IP address in the Ethernet Interface dialog was not used, if DHCP was activated and the first (main) IP address had not been defined explicitly.
Download