MikroTik RouterOS X86 Firmware 6.42 RC 56
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: all_packages-x86-6.42rc56.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
What’s new in 6.42rc56:
– crs3xx – added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
– dhcpv4-server – added “dns-none” option to “/ip dhcp-server network dns”;
– dns – do not generate “Undo” messages on changes to dynamic servers;
– ike2 – fixed framed IP address received from RADIUS server;
– ippool6 – added pool name to “no more addresses left” error message;
– ipv6 – fixed IPv6 behavior when slave leaves bridge;
– ipv6 – update IPv6 DNS from RA only when it is changed;
– led – added “Dark Mode” support for wAP 60G;
– led – added w60g alignment trigger;
– rb1100ahx4 – improved reliability on hardware encryption;
– w60g – added “tx-power” setting (CLI only);
– w60g – added RSSI information (CLI only);
– w60g – added TX sector alignment information (CLI only);
– winbox – fixed Neighbor Discovery and MAC Winbox (introduced in v6.42rc);
– wireless – fixed RB911-5HnD low transmit power issue;
– wireless – fixed wsAP wrong 5 GHz interface MAC address;
Other changes since 6.41.3:
– tile – improved overall system performance and stability (“/system routerboard upgrade” required);
– !) w60g – increased supported distance for wAP 60G to 200+ meters;
– bridge – added host aging timer for crs3xx and Atheros hw-bridges;
– bridge – added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts (CLI only);
– bridge – added per-port learning options (CLI only);
– bridge – added support for static hosts;
– bridge – fixed “master-port” configuration conversion from pre-v6.41 RouterOS versions (introduced in 6.42rc);
– bridge – fixed bridge port interface parameter under “/interface bridge host print detail”;
– bridge – fixed false MAC address learning on hAP ac2 and cAP ac devices;
– bridge – fixed incorrect “fast-forward” enabling when ports were switched;
– bridge – fixed MAC learning for VRRP interfaces on bridge;
– bridge – fixed reliability on software bridges when used on devices without switch chip;
– bridge – hide options for disabled bridge features in CLI;
– bridge – show “hw” flags only on Ethernet interfaces and interface lists;
– capsman – added “allow-signal-out-of-range” option for Access List entries;
– capsman – added support for “interface-list” in Access List and Datapath entries;
– capsman – improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
– capsman – log “signal-strength” when successfully connected to AP;
– certificate – added PKCS#10 version check;
– certificate – dropped DES support and added AES instead for SCEP;
– certificate – dropped MD5 support and require SHA1 as minimum for SCEP;
– certificate – fixed incorrect SCEP URL after an upgrade;
– chr – added “open-vm-tools” on VMware installations;
– chr – added “qemu-guest-agent” and “virtio-scsi” driver on KVM installations;
– chr – added “xe-daemon” on Xen installations;
– chr – added support for “multi-queue” feature for “virtio-net” driver;
– chr – added support for Amazon Elastic Network Adapter (ENA) driver;
– chr – added support for booting from NVMe disks;
– chr – added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
– chr – added support for NIC hot-plug on VMware and Xen installations;
– chr – fixed additional disk detaching on Xen installations;
– chr – fixed interface matching by name on VMware installations;
– chr – fixed interface naming order when adding more than 4 interfaces on VMware installations;
– chr – fixed suspend on Xen installations;
– chr – make additional disks visible under “/disk” on Xen installations;
– chr – make virtio disks visible under “/disk” on KVM installations;
– chr – run startup scripts also on the first boot on AWS and Google Cloud installations;
– console – fixed “idpr-cmtp” protocol by changing its value from 39 to 38;
– console – improved console stability after it has not been used for a long time;
– crs1xx/2xx – added BPDU value for “ingress-vlan-translation” menu “protocol” option;
– crs212 – fixed Ethernet boot through CRS326 devices;
– crs326 – fixed known multicast flooding to the CPU;
– crs3xx – added switch port “storm-rate” limiting options;
– detnet – fixed “detect-internet” feature unavailability if router had too long identity (introduced in v6.41);
– dhcp – improved DHCP service reliability when it is configured on bridge interface;
– dhcp – reduced resource usage of DHCP services;
– dhcpv6 – make sure that time is set before restoring bindings;
– dhcpv6-client – added info exchange support;
– dhcpv6-client – added possibility to specify options;
– dhcpv6-client – added support for options 15 and 16;
– dhcpv6-client – implement confirm after reboot;
– dhcpv6-server – added DHCPv4 style user options;
– email – set maximum number of sessions to 100;
– fetch – added “http-content-type” option to allow setting MIME type of the data in free text form;
– fetch – added “output” option for all modes in order to return result to file, variable or ignore it;
– fetch – increased maximum number of sessions to 100;
– filesystem – implemented additional system storage maintenance checks on ARM CPU based devices;
– flashfig – properly apply configuration provided by Flashfig;
– gps – improved NMEA sentence handling;
– health – fixed empty measurements on CRS328-24P-4S+RM;
– health – log warning when switching between redundant power supplies;
– hotspot – improved HTTPS matching in Walled Garden rules;
– ike1 – display error message when peer requests “mode-config” when it is not configured;
– ike1 – do not accept “mode-config” reply more than once;
– ike1 – fixed wildcard policy lookup on responder;
– interface – improved interface configuration responsiveness;
– ippool – added ability to specify comment;
– ipsec – fixed AES-CTR and AES-GCM support on RB1200;
– ipsec – improved single tunnel hardware acceleration performance on MMIPS platform devices;
– ipsec – properly detect interface for “mode-config” client IP address assignment;
– kidcontrol – initial work on “/ip kid-control” feature;
– led – fixed unused “link-act-led” LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
– led – removed unused “link-act-led” trigger for devices which does not use it;
– lte – added initial support for Quectel LTE EP06-E;
– lte – added initial support for SIM7600 LTE modem interface;
– lte – added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
– lte – do not add DHCP client on LTE modems that doesn’t use DHCP;
– lte – fixed DHCP client adding for MF823 modem;
– lte – fixed LTE band setting for SXT LTE;
– mac-ping – fixed duplicate responses;
– modem – added initial support for AC340U;
– netinstall – sign Netinstall executable with an Extended Validation Code Signing Certificate;
– netwatch – limit to read, write, test and reboot policies for Netwatch script execution;
– poe – hide PoE related properties on interfaces which does not provide power output;
– poe – do not show “poe-out-current” on devices which can not determine it;
– ppp – added initial support for NETGEAR AC340U and ZyXEL WAH1604;
– ppp – allow to override remote user PPP profile via “Mikrotik-Group”;
– quickset – by default use “/24” subnet for local network;
– quickset – fixed NAT if PPPoE client is used for Internet access;
– quickset – properly detect IP address when one of the bridge modes is used;
– quickset – properly detect LTE interface on startup;
– quickset – show “G” flag for guest users;
– r11e-lte – improved LTE connection initialization process;
– routerboard – added RouterBOOT “auto-upgrade” after RouterOS upgrade (extra reboot required);
– routerboard – properly detect hAP ac^2 RAM size;
– routerboot – fixed RouterBOOT upgrade process (introduced in v6.42rc);
– sniffer – fixed situation when “/tool sniffer packet” returned packets in incorrect order;
– snmp – added “/caps-man interface print oid”;
– snmp – added “/interface w60g print oid”;
– snmp – added “board-name” OID;
– snmp – improved request processing performance for wireless and CAP interfaces;
– ssh – fixed SSH service becoming unavailable;
– ssh – generate SSH keys only on the first connect attempt instead of the first boot;
– ssh – improved key import error messages;
– ssh – remove imported public SSH keys when their owner user is removed;
– switch – hide “ingress-rate” and “egress-rate” for non-crs3xx switches;
– tile – added “aes-ctr” hardware acceleration support;
– tr069-client – added “DownloadDiagnostics” and “UploadDiagnostics”;
– tr069-client – correctly return “TransferComplete” after vendor configuration file transfer;
– tr069-client – fixed “/tool fetch” commands executed with “.alter” script;
– tr069-client – fixed HTTPS authentication process;
– traffic-flow – fixed IPv6 destination address value when IPFIX protocol is used;
– upgrade – improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
– ups – improved communication between router and UPS;
– ups – improved disconnect message handling between RouterOS and UPS;
– userman – added support for ARM and MMIPS platform;
– watchdog – retry to send “autosupout.rif” file to an e-mail if initial delivery failed up to 3 times within 20 second interval;
– winbox – added “antenna” setting under GPS settings for MIPS platform devices;
– winbox – added “crl-store” setting to certficate settings;
– winbox – added “insert-queue-before” to DHCP server;
– winbox – added “use-dn” setting in OSPF instance General menu;
– winbox – added 160 MHz “channel-width” to wireless settings;
– winbox – added broadcast and flood settings to bridge ports;
– winbox – added DHCPv6 client info request type and updated statuses;
– winbox – added missing protocol numbers to IPv4 and IPv6 firewall;
– winbox – added possibility to delete SMS from inbox;
– winbox – allow to comment new object without committing it;
– winbox – allow to open bridge host entry;
– winbox – fixed name for “out-bridge-list” parameter under bridge firewall rules;
– winbox – fixed typo from “UPtime” to “Uptime”;
– winbox – fixed Winbox closing when viewing graph which does not contain any data;
– winbox – improved stability when using trackpad scrolling in large lists;
– winbox – made UDP local and remote TX size parameters optional in Bandwidth Test tool;
– winbox – moved “ageing-time” setting from STP to General tab;
– winbox – moved OSPF instance “routing-table” setting in OSPF instance General menu;
– winbox – removed “VLAN” section from “Switch” menu for CRS3xx devices;
– winbox – show Bridge Port PVID column by default;
– winbox – show CQI in LTE info;
– winbox – show dual SIM options only for RouterBOARDS which does have two SIM slots;
– winbox – show only master CAP interfaces under CAPsMAN wireless scan tool;
– winbox – use proper graph name for HDD graphs;
– wireless – added “realm-raw” setting for “/interface wireless interworking-profiles” (CLI only);
– wireless – added initial support for “nstreme-plus”;
– wireless – added support for “band=5ghz-n/ac”;
– wireless – added support for “interface-list” for Access List entries;
– wireless – added support for legacy AR9485 chipset;
– wireless – enable all chains by default on devices without external antennas after configuration reset;
– wireless – fixed “wds-slave” channel selection when single frequency is specified;
– wireless – fixed incompatibility with macOS clients;
– wireless – fixed long “scan-list” entries not working for ARM based wireless interfaces;
– wireless – fixed nv2 protocol on ARM platform SXTsq devices;
– wireless – fixed RTS/CTS option for the ARM based wireless devices;
– wireless – improved compatibility with specific wireless AC standard clients;
– wireless – improved Nv2 PtMP performance;
– wireless – improved packet processing on ARM platform devices;
– wireless – improved wireless scan functionality;
– wireless – improved wireless stability on hAP ac2 devices while USB is being used;
Download