MikroTik RouterOS ARM Firmware 6.43.2
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: all_packages-arm-6.43.2.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
MAJOR CHANGES IN v6.44:
– upgrade – release channels renamed – „bugfix“ to „long-term“, „current“ to „stable“ and „release candidate“ to „testing“;
– upgrade – „testing“ release channel now can contain „beta“ together with „release-candidate“ versions;
Änderungen in dieser Version:
– cloud – added command „/system backup cloud“ for backup storing on cloud (CLI only);
– bridge – improved packet handling when hardware offloading is being disabled;
– cloud – ignore „force-update“ command if DDNS is disabled;
– crs3xx – fixed possible memory leak when disabling bridge interface;
– defconf – properly clear global variables when generating default configuration after RouterOS upgrade;
– discovery – properly use Sytem ID for „software-id“ value on CHR;
– e-mail – added info log message when e-mail is sent successfully;
– lte – fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
– proxy – removed port list size limit;
– romon – improved reliability when processing RoMON packets on CHR;
– routerboard – show „boot-os“ option only on devices that have such feature;
– switch – fixed port mirroring on devices that do not support CPU Flow Control;
– webfig – allow to change user name when creating a new system user;
– webfig – fixed time interval settings not applied properly under „IP/Kid Control/Kids“ menu;
– winbox – added 4th chain selection for „HT TX chains“ and „HT RX chains“ under „CAPsMAN/CAP Interface/Wireless“ tab;
– winbox – added „allow-dual-stack-queue“ setting to „IP/DHCP Server/Leases“ menu;
– winbox – added „allow-dual-stack-queue“ setting to „IPv6/DHCPv6 Server/Bindings“ menu;
– winbox – added „radio-name“ setting to „CAPsMAN/CAP Interface/General“ tab;
– winbox – added „secondary-channel“ setting to „CAPsMAN/CAP Interface/Channel“ tab;
– winbox – fixed corrupt user database after specifying allowed address range (introduced in v6.43);
– winbox – make bridge port „untrusted“ by default when creating new port;
– winbox – show „IP/Cloud“ menu on CHR;
– winbox – show „System/RouterBOARD/Mode Button“ on devices that have such feature;
Other changes since v6.43:
– chr – assign interface names based on underlying PCI device order on KVM;
– crs317 – fixed packet forwarding on bonded interfaces without hardware offloading;
– crs3xx – improved data transmission between 10G and 1G ports;
– dhcpv4-server – fixed service becoming unresponsive after interface leaves and enters the same bridge;
– dhcpv6-client – log only failed pool additions;
– ethernet – fixed IPv6 packet forwarding on IPQ4018 devices;
– hotspot – properly update dynamic „walled-garden“ entries when changing „dst-host“;
– ike2 – added option to specify certificate chain;
– ike2 – fixed local address lookup when initiating new connection;
– ike2 – fixed rare authentication and encryption key mismatches after rekey with PFS enabled;
– lte – fixed DHCP relay packet forwarding when in passthrough mode;
– lte – fixed Jaton/SQN modems preventing router from booting properly;
– rb3011 – added IPsec hardware acceleration support;
– routerboard – fixed memory tester reporting false errors on IPQ4018 devices („/system routerboard upgrade“ required);
– sniffer – made „connection“, „host“, „packet“ and „protocol“ sections read-only;
– switch – fixed ACL rules on IPQ4018 devices;
– upnp – improved UPnP service stability when handling HTTP requests;
– w60g – added „frequency-list“ setting;
– w60g – fixed interface LED status update on connection;
– winbox – allow setting „network-mode“ to „auto“ under LTE interface settings;
– wireless – removed „czech republic 5.8“ regulatory domain information as it overlaps with „ETSI 5.7-5.8“;
Download