Integra DTR-80.3 A/V Receiver Firmware 1.10
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: ONKAVR000A_HAIAHAHA00HA_110.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Änderungen:
– Corrects lock up failure when using Telstra T Box or MiCasaVerde Vera Lite controller on the same network
– Addresses format changing of Rhapsody
Update Procedure:
– Connect a USB device to your PC. If there is any data in the USB device, remove it first.
– Laden Sie die Firmware herunter file.
– Copy the extracted files to the USB device. Be careful not to copy the zip file.
– Remove the USB device from your PC and connect it to the USB port on the AV receiver.
– Make sure the AV receiver and TV are turned on.
– If the AV receiver is in standby mode, press ON/STANDBY on the AV receiver to light the front display.
– Select the USB input source.
– “Now Initializing…” is displayed on the front display and then the name of the USB device is displayed. It takes 20 to 30 seconds to recognize the USB device.
– Press RECEIVER followed by SETUP on the remote controller or Press SETUP button on the front panel.
– Setup menu will be displayed on the TV screen. The procedures thereafter can also be performed on the AV receiver by using its SETUP, arrow and ENTER buttons.
Download