Hikvision DS-2CD6026FHWD Network Camera Firmware 5.3.5
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: &file=IPC_R3_EN_STD_5.3.5_151218.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Dieses Paket enthält die erforderlichen Installationsdateien für die Hikvision DS-2CD6026FHWD Network Camera Firmware-Version 5.3.5.
New features:
– Warning message is shown when H.264+ is enabled to inform the unavailable functions with H.264+.
– H.264+ algorithm is not supported simultaneously with third stream, 1920x1080p, 50/60fps high frame rate, ROI, target cropping, smoothing, profile, SVC and I frame interval setting.
– New mechanism is applied to avoid network disconnection.
Installationsschritte:
1. Download the zip file . Once you have downloaded the file unzip it using your preferred unzipping tool and save the file to a sensible place.
2. Log into your camera.
3. Go to Configuration>System>Maintenance.
4. At the bottom of the Maintenanace page, under the ‘Remote Upgrade’ make sure that ‘firmware’ is selected from the drop down list. Now click browse and select the upgrade that you have saved. Once selected, click ‘upgrade’.
5. Once you start the upgrade you will be prompted that your device will reboot; click [OK]. The camera will now begin upgrading.
6. Once the camera has updated go to System>Device information and make sure the latest firmware has been installed.
Download