Gigabyte Z390 AORUS Xtreme Waterforce 5G (rev. 1.0) Intel Serial IO Treiber 30.100.1902.3 für Windows 10 64-bit
Dateityp: Treiber.
Betriebssystem: Windows 10.
Dateiname: mb_driver_chipset_intel_serialio_30.100.1902.3.zip.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Hauptmerkmale:
– Bundled with pre-tested Intel Core i9-9900K
– Supports 9th and 8th Gen Intel Core Processors
– Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
– Intel Optane Memory Ready
– 16 Phase IR Digital VRM Solution with PowIRstage
– Cutting-edge AORUS All-In-One Monoblock for both CPU and PCH area.
– Onboard Intel CNVI 802.11ac 2×2 Wave 2 Wi-Fi with All new AORUS Antenna
– 127dB SNR AMP-UP Audio with High-End ESS SABRE 9018K2M DAC, LME 49720 and OPA1622 OP-AMP, WIMA audio capacitors
– AQUANTIA 10GbE BASE-T LAN and Intel Gigabit LAN with cFosSpeed
– Intel Thunderbolt 3 onboard
– Exclusive RGB FAN COMMANDER and OC Touch for professional casemodders and overclockers
– USB TurboCharger for mobile device fast charge support
– RGB FUSION 2.0 with Multi-Zone Addressable LED Light Show design, support Addressable LED & RGB LED strips
– Smart Fan 5 features Multiple Temperature Sensors and Hybrid Fan Headers with FAN STOP
– Front USB 3.1 Gen 2 Type-C Header
– Triple Ultra-Fast M.2 with PCIe Gen3 x4 interface with Triple Thermal Guards
Dieses Paket enthält die Dateien, die zur Installation des Treibers Intel Serial IO benötigt werden. Wenn es installiert wurde, können durch Aktualisieren (Überschreiben) Probleme behoben, neue Funktionen hinzugefügt oder vorhandene erweitert werden. Auch wenn andere Betriebssysteme möglicherweise ebenfalls kompatibel sind, empfehlen wir, diese Version nicht auf anderen als den angegebenen Plattformen anzuwenden.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Download