Gigabyte GA-M56S-S3 (rev. 1.x) NVIDIA MCP65 Chipset Treiber 12.15 für 2K/XP
Dateityp: Treiber.
Betriebssystem: Windows 2000, Windows XP.
Dateiname: motherboard_driver_chipset_nvidia_mcp65_64xp.exe.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
CPU
1. Unterstützung für Socket AM2+/ AM2 processors: AMD PhenomFX processor/ AMD Phenom processor/ AMD Athlon 64 FX processor/AMD Athlon 64 X2 Dual-Core processor/AMD Athlon 64 processor/AMD Sempron processor
(Note) If you install AMD AM2+ CPU on AM2 motherbord, the system bus speed will downgrade from HT3.0(5200MHz) to HT1.0(2000 MT/s) spec; however, the frequency of AM2+ CPU will not be impacted. Please refer “CPU Support List” for more information.
Chipset
1. NVIDIA nForce 560
2. Super I/O: ITE IT8716 chip
3. Integrated Peripherals:
1. T.I IEEE1394 controller
2. Realtek 8211BL Gigabit Ethernet Phy
3. Realtek ALC888 Audio Codec
Memory
1. 4 DDR2 DIMM memory slots (supports up to 16GB memory)
2. Supports dual channel DDR2 800/667/533/400 DIMMs
3. Supports 1.8V DDR2 DIMMs
Internal I/O Connectors
1. 1 24-pin ATX power connector
2. 1 4-pin ATX 12V power connector
3. 1 floppy connector
4. 1 IDE connector
5. 4 SATA 3Gb/s connectors
6. 1 CPU fan connector
7. 1 system fan connector
8. 1 front panel connector
9. 1 front audio connector
10. 1 CD In connector
11. 1 SPDIF In connector
12. 1 SPDIF out connector
13. 3 USB 2.0/1.1 connectors for additional 6 USB 2.0/1.1 ports by cables
14. 2 IEEE1394a connectors for additional 2 port by cables
15. 1 chassis intrusion header
16. 1 Power LED connector
Expansion Slots
1. 1 PCI Express x 16 slot
2. 2 PCI Express x 1 slots
3. 4 PCI slots
Back Panel Connectors
1. 1 PS/2 keyboard port
2. 1 PS/2 mouse port
3. 1 parallel port
4. 1 SPDIF out port (coaxial)
5. 1 SPDIF out port (optical)
6. 1 serial port (COMA)
7. 4 USB 2.0/1.1 ports
8. 1 IEEE1394 port
9. 1 RJ-45 port
10. 6 audio jacks (Line In / Line Out / MIC In / Surround Speaker Out (Rear Speaker Out) / Center/Subwoofer Speaker Out / Side Speaker Out)
Power
1. ATX power connector and ATX 12V connector
Form Factor
1. ATX form factor; 30.5cm x 21.4cm
H/W Monitoring
1. System voltage detection
2. CPU/System temperature detection
3. CPU/System fan speed detection
4. CPU/System overheating warning
5. CPU/System fan fail warning
6. CPU/System fan speed control
BIOS
1. 1 4Mbit flash ROM
2. Use of licensed AWARD BIOS
Other Features
1. Supports @BIOS
2. Supports Download Center
3. Supports Q-Flash
4. Supports EasyTune
5. Supports Xpress Install
6. Supports Xpress Recovery2
7. Supports Virtual Dual BIOS
Es wird dringend empfohlen, immer die neueste verfügbare Treiberversion zu verwenden.
Vergessen Sie nicht, so oft wie möglich auf unserer Website nachzuschlagen, um über die neuesten Treiber, Software und Spiele auf dem Laufenden zu bleiben.
Versuchen Sie, einen Systemwiederherstellungspunkt festzulegen, bevor Sie einen Gerätetreiber installieren. Dies hilft, wenn Sie einen falschen Treiber installiert haben. Probleme können auftreten, wenn Ihr Hardwaregerät zu alt ist oder nicht mehr unterstützt wird.
Download