Gigabyte GA-H97-HD3 (rev. 1.1) BIOS F2
Dateityp: BIOS.
Betriebssystem: AnyOS.
Dateiname: mb_bios_ga-h97-hd3_f2.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Spezifikationen:
CPU:
– Unterstützung für Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/ Intel Celeron processors in the LGA1150 package
– L3 cache varies with CPU
Chipset:
– Intel H97 Express Chipset
Memory:
– 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
– Dual channel memory architecture
– Unterstützung für DDR3 1600/1333 MHz memory modules
– Unterstützung für non-ECC memory modules
– Unterstützung für Extreme Memory Profile (XMP) memory modules
Onboard Graphics:
– Integrated Graphics Processor – Intel HD Graphics support
– 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60Hz
– 1 x DVI-D port, supporting a maximum resolution of 1920×1200@60Hz
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@24Hz or 2560×1600@60Hz
– Unterstützung für up to three displays at the same time
– Maximum shared memory of 512MB
Audio:
– Realtek ALC887 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Unterstützung für S/PDIF Out
LAN:
– Realtek GbE LAN chip (10/100/1000 Mbit)
Expansion Slots:
– 1 x PCI Express x16 slot, running at x16 (PCIEX16)
– 1 x PCI Express x16 slot, running at x4 (PCIEX4)
– 2 x PCI Express x1 slots
– 2 x PCI slots
Multi-Graphics Technology:
– Unterstützung für 2-Way AMD CrossFire technology
Storage Interface:
– 6 x SATA 6Gb/s connectors
– Unterstützung für RAID 0, RAID 1, RAID 5, and RAID 10
USB:
– 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through the internal USB headers)
– 8 x USB 2.0/1.1 ports (2 ports on the back panel, 6 ports available through the internal USB headers)
Internal I/O Connectors:
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 6 x SATA 6Gb/s connectors
– 1 x CPU fan header
– 3 x system fan headers
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 1 x USB 3.0/2.0 header
– 3 x USB 2.0/1.1 headers
– 1 x serial port header
– 1 x parallel port header
– 1 x Clear CMOS jumper
Back Panel Connectors:
– 1 x PS/2 keyboard/mouse port
– 1 x D-Sub port
– 1 x DVI-D port
– 1 x HDMI port
– 4 x USB 3.0/2.0 ports
– 2 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In)
I/O Controller:
– iTE I/O Controller Chip
H/W Monitoring:
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
Form Factor:
– ATX Form Factor: 30.5cm x 19.0cm
Download