Gigabyte GA-H61-S3 (rev. 2.0) Intel Rapid Storage Technology 10.6.0.1002
Dateityp: Treiber.
Betriebssystem: Windows 7, Windows Vista, Windows XP.
Dateiname: motherboard_driver_intel_sataraid_irst.exe.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
CPU
– Unterstützung für Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package
– L3 cache varies with CPU
Chipset
– Intel H61 Express Chipset
Memory
– 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
– Dual channel memory architecture
– Unterstützung für DDR3 1333/1066/800 MHz memory modules
– Unterstützung für non-ECC memory modules
– Unterstützung für Extreme Memory Profile (XMP) memory modules
* To support XMP memory, you must install an Intel 22nm (Ivy Bridge) CPU.
Onboard Graphics
Integrated Graphics Processor:
– 1 x D-Sub port
Audio
– Realtek ALC887 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
– Unterstützung für S/PDIF Out
LAN
– Realtek 8111F LAN chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
* Whether PCI Express 3.0 is supported depends on CPU and graphics card compatibility.
– 2 x PCI Express x1 slots
(All PCI Express x1 slots conform to PCI Express 2.0 standard.)
– 3 x PCI slots
Storage Interface Chipset:
– 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
USB Chipset:
– Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 4-pin ATX 12V power connector
– 4 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 2 x system fan headers
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 2 x USB 2.0/1.1 headers
– 1 x clearing CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 1 x serial port
– 1 x D-Sub port
– 4 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller
– iTE I/O Controller Chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System/Power fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 32 Mbit flash
– Use of licensed AMI EFI BIOS
– Unterstützung für DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Unique Features
– Unterstützung für @BIOS
– Unterstützung für Q-Flash
– Unterstützung für Xpress Install
– Unterstützung für Xpress Recovery2
– Unterstützung für EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Unterstützung für ON/OFF Charge
Bundle Software
– Norton Internet Security (OEM version)
– Intel Rapid Start Technology
– Intel Smart Connect Technology
Operating System
– Unterstützung für Microsoft Windows 8/7/Vista/XP
Form Factor
– ATX Form Factor; 30.5cm x 19.0cm
Es wird dringend empfohlen, immer die neueste verfügbare Treiberversion zu verwenden.
Vergessen Sie nicht, so oft wie möglich auf unserer Website nachzuschlagen, um über die neuesten Treiber, Software und Spiele auf dem Laufenden zu bleiben.
Versuchen Sie, einen Systemwiederherstellungspunkt festzulegen, bevor Sie einen Gerätetreiber installieren. Dies hilft, wenn Sie einen falschen Treiber installiert haben. Probleme können auftreten, wenn Ihr Hardwaregerät zu alt ist oder nicht mehr unterstützt wird.
Download