Edimax CAP1200 Switch Firmware 1.3.12
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: CAP1200_v1.3.12.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
24-Port Gigabit PoE+ with 4 SFP Slots Web Smart Switch
– IEEE 802.3af/at PoE compliant.
– Twenty-four Gigabit Ethernet ports and four mini-GBIC/SFP slots.
– Up to 30W per port (total power budget: 400W) for powering PoE-enabled devices.
– Auto-detection of powered devices (PD) and power consumption levels.
– Auto fault-detection on over/under current & voltage.
– Access Control List (ACL) support.
– Switch capacity:56Gbps & Forwarding rate:35.7Mbps.
– IEEE 802.1Q-based VLAN for network segmentation to improve performance and security.
– IGMP Snooping V1 / V2 support.
– 8K MAC address table and jumbo frame support up to 9KB.
– 19-inch 1U rack-mount.
Fixes
– [AP mode] Fixed SNMP cannot get VLAN group value (vlanType and vlanID).
– [AP mode] Fixed SNMP get wrong format in system description.
– [AP mode] Fixed Airplay connection issue.
– [NMS mode] Fixed When user click Restart function that it need to double confirm and warning message
– [NMS mode] Fixed if the CAP1200 change IP address mode form DHCP client to static IP and then you cannot access CAP1200 anymore.
– [NMS Mode] Fixed 5GHz Wireless auto pilot function always run on Band1 channel
– [NMS mode] Fixed NMS Firmware upgrade issue with CAP1200
– [NMS mode] Fixed wireless active client “Search” function issue
Modifications
– change SNMP default value from disable to enable
– [NMS mode] Disable auto pilot function for NMS mode default setting
– [NMS mode] auto pilot channel setting add new item for channel 1,6,11 only
New Feature
– Added IGMP ON/OFF feature.
– [AP Mode] Support Repeater mode
– [NMS mode] Allow users to change the HTTP port number.
– [NMS mode] Event Log support sorting item function
– [NMS mode] Support wireless schedule function
Download