DisplayLink USB Graphics Treiber/Utility 9.1 M2
Dateityp: Treiber.
Betriebssystem: Windows 10, Windows 7, Windows 8, Windows 8.1.
Dateiname: DisplayLink USB Graphics Software for Windows 9.1 M2.exe.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
This is the R9.1 M2 product release, the first maintenance release of 9.1 driver. It has been put through our full system tests and is suitable for deployment to end-users.
DisplayLink Software Release 9.1 delivers:
– Display layout provisioning for hotdesking/hoteling offices to allow IT-defined first-connect display relative positions.
– Windows 10 postponed installation: when pushing the MSI to users, driver will be updated straight away if no DisplayLink product is detected, or at the next machine reboot if a device is detected.
– Bug fixes
Issues fixed in 9.1 M2 release (9.1.1651.0/9.1.1644.0)
– DL-6000 series: DisplayPort 1.4 CTS compliance chapters 4.4.1.1~3 required manual Windows 10 switch to extend to pass (24977)
– DL-6000 series: 4K monitor could only reach 2048×1152 when connected via some DisplayPort++ type 2 passive adapter (29859)
– Hot-desking package: multiple reliability improvements in assigning first connect saved layout in the dock (29821, 29807)
– Hot-desking package improvement: apply extend left by default if using the package with non-configured docking stations/adapters (29609)
Versionen:
– Software Package Version: 9.1.1711.0
– DisplayLink Ethernet Driver Version: 9.1.1645.0
– DisplayLink Audio Driver Version: 9.1.1645.0
Windows 7 – Windows 8.1:
– DisplayLink Core Software Version: 9.1.1651.0
Windows 10 v1607 Build 14393 onwards:
– DisplayLink Graphics Driver Version: 9.1.1644.0
The DL-3xxx, DL-4xxx (where applicable) and DL-5xxx plus the associated software, is tested to meet the following compliances at the time of release:
– USB 2.0
– DisplayPort (source 1.2)
– DisplayPort ++
– HDCP 1.x over DP
– HDCP 1.x over HDMI
– HDCP 1.x over DVI
– HDMI (source 1.4)
The DL-6xxx plus the associated software, is tested to meet the following compliances at the time of release:
– USB 2.0
– USB 3.2
– DisplayPort (source 1.2)
– DisplayPort ++
– HDCP 1.x over DP
– HDCP 1.x over HDMI
– HDMI (source 1.4 and 2.0)
Devices supported:
– DL-6910 / DL-6950
– DL-5500 / DL-5700 / DL-5900 / DL-5910
– DL-41xx
– DL-3100 / DL-3500 / DL-3700 / DL-3900 / DL-3950
– DL115 / DL125 / DL165 / DL195
Um dieses Paket zu installieren, gehen Sie bitte wie folgt vor:
– Stellen Sie sicher, dass alle Systemanforderungen erfüllt sind.
– Speichern Sie das herunterladbare Paket an einem zugänglichen Ort (z. B. auf Ihrem Desktop).
– Suchen Sie die neu heruntergeladene Datei und doppelklicken Sie darauf.
– Ermöglichen Sie Windows, die Datei auszuführen (falls erforderlich).
– Lesen Sie die EULA (Endbenutzer-Lizenzvereinbarung) und stimmen Sie dem Installationsprozess zu.
– Folgen Sie den Anweisungen auf dem Bildschirm.
– Schließen Sie den Assistenten und führen Sie einen Systemneustart durch, damit die Änderungen wirksam werden.
Download