Dell QLogic FastLinQ Network Device Firmware 08.07.25
Dateityp: Firmware.
Betriebssystem: Windows Server 2008, Windows Server 2012.
Dateiname: Network_Firmware_WR5R5_WN32_08.07.25_A00-00_01.EXE.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
This release provides updated network controller firmware for the QLogic FastLinQ (BCM57xx, BCM578xx and 45xxx) Network Adapters. This release should be used with the QLogic family version 20.0.0 device drivers.
Fixes & Enhancements
Fixes:
– In the presence of heavy broadcast traffic, 57800 LOM adapter keeps continuously attempting PXE boot and eventually fails with PXE- E63 error.
– When verifying storage targets in RACADM the info does match up with CMC view
– Change Max PF MSI-X Vector configuration in preboot options from 0 .. 64 to 17..32
– On M630 running ESXi5.5 U2 with BCM57810 mezz adapter connected to MXL blade switch, the interface duplex setting will be sometimes incorrectly displayed as half duplex.
– On M620 running ESXi with BCM57810 adapter, sometimes scsi aborts could lead to system crash (PSOD).
– iDRAC-ICEE:Unable to obtain DHCP IP on Shared Lom with Qlogice NXII NIC
– Qlogic 57810 and Force10 S3048 switch combo produce CRC errors with iSCSI Read at 9000 MTU
– 57840 CMM reset configuration to default and LC default settings do not reset all values to default
– With 578xx adatpers, if the number of MSI-X vectors is set to 2 in preboot configuration menu, no Network Adapter found after booting to OS.
– Qlogic Banner Message timeout value couldn’t set to 15(no delay).
– iDrac IP lossing while updating FW from N-1 to N when idrac is in shared mode
Enhancements:
– Added support for QLogic FastLinQ 25G 45xxx Ethernet Adapters
Applies to
– BCM5709C Dual Port NIC without iSCSI Offload
– BCM5709S Dual Port SERDES Mezzanine Card for Blade Systems
– BCM57711 Dual Port KX4 Noble MC
– BCM95709 iSCSI Offload Dual Port NIC
– BCM95709C 10/100/1000BASET Quad Port NIC
– BCM957711 10G SFP+ Dual Port NIC
– Dual Port 10Gb Ethernet (BCM57810S) LOM
– Dual Port 10Gb Ethernet (BCM57810S) LOM (FC430)
– M710HD Dual Port 10Gig 57712 NDC
– QLogic 57800S Quad Port 2, 1GB x 2, 10Gb rNDC Base-T
– QLogic 57800S Quad Port 2, 1GB x 2, 10Gb rNDC SFP+/DA
– QLogic 57810S Dual 10GE PCIe Standup Base-T CNA
– QLogic 57810S Dual 10GE PCIe Standup SFP+/DA CNA
– QLogic 57810S-k Dual Port 10Gb bMezz KR CNA
– QLogic 57810S-K Dual Port 10Gb bNDC KR CNA
– QLogic 57840S Quad Port 10GB rNDC SFP+/DA
– QLogic 57840S-K Quad Port 10Gb bNDC KR CNA
Installation instructions
Dell Update Package Instructions
Download
1. Click Download Now to download the file.
2. Wenn das Fenster zum Herunterladen von Dateien angezeigt wird, klicken Sie auf Speichern, um die Datei auf Ihrer Festplatte zu speichern.
Installation
1. Navigieren Sie zu dem Speicherort, an den Sie die Datei heruntergeladen haben, und doppelklicken Sie auf die neue Datei.
2. Lesen Sie die im Dialogfenster angezeigten Release-Informationen durch.
3. Laden Sie die im Dialogfeld angegebenen Voraussetzungen herunter und installieren Sie sie, bevor Sie fortfahren.
4. Klicken Sie auf die Schaltfläche Installieren.
5. Follow the remaining prompts to perform the update
Download