Dell Alienware 13 Intel Serial IO Treiber 1.1.226.0 für Windows 8.1 64-bit
Dateityp: Treiber.
Betriebssystem: Windows 8, Windows 8.1.
Dateiname: Alienware-13_Chipset_Driver_1R2K3_WN_1.1.226.0_A00.EXE.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Dieses Paket enthält die Dateien, die zur Installation des Treibers Intel Serial IO benötigt werden. Wenn es installiert wurde, können durch Aktualisieren (Überschreiben) Probleme behoben, neue Funktionen hinzugefügt oder vorhandene erweitert werden. Auch wenn andere Betriebssysteme möglicherweise ebenfalls kompatibel sind, empfehlen wir, diese Version nicht auf anderen als den angegebenen Plattformen anzuwenden.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Über Serial IO Treiber:
Wenn Sie dieses Paket installieren, wird Ihr Gerät von kompatiblen Systemen ordnungsgemäß erkannt und kann sogar von neuen Funktionen oder verschiedenen Fehlerkorrekturen profitieren.
Bitte beachten Sie, dass wir, auch wenn andere Betriebssysteme möglicherweise kompatibel sind, nicht empfehlen, Software auf anderen Plattformen als den angegebenen zu installieren. Andernfalls kann die Installation abstürzen, wodurch das Gerät möglicherweise unbrauchbar wird.
Wenn es um die Installation des Pakets geht, sollten die Schritte kein großer Aufwand sein, da jeder Hersteller versucht, sie so einfach wie möglich zu gestalten. In der Regel müssen Sie die Kompatibilität überprüfen, das Paket abrufen, das verfügbare Setup ausführen und die Anweisungen auf dem Bildschirm befolgen.
Aufgrund der großen Anzahl an Geräten und der verschiedenen Möglichkeiten, diese Pakete zu installieren, sollten Sie jedoch zuerst das Installationshandbuch lesen, um ein erfolgreiches Update sicherzustellen.
Wenn dies gesagt ist, klicken Sie auf die Schaltfläche zum Herunterladen und wenden Sie die vorliegende Software auf Ihr Produkt an. Besuchen Sie auch ständig unsere Website, um über die neuesten Versionen auf dem Laufenden zu bleiben.
Download