D-Link DCS-1110 rev. A IP Camera Firmware 1.01
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: DCS-1110_FIRMWARE_1.01.ZIP.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Upgrade-Anweisungen:
Führen Sie die folgenden Schritte aus, um die Firmware zu aktualisieren:
1. Laden Sie die neueste Firmware herunter Datei. Die Datei hat das Dateiformat .bin.
2. Melden Sie sich bei der Webbenutzeroberfläche der Kamera an und rufen Sie Setup / Wartung / Firmware-Aktualisierung auf. 3. Klicken Sie auf Durchsuchen… und geben Sie die Firmware-Datei an.
3. Klicken Sie auf Upgrade. Die Kamera beginnt mit dem Upgrade und startet automatisch neu, wenn das Upgrade abgeschlossen ist.
How to update your camera firmware:
– Check your connections. Make sure your device is connected to your router with an Ethernet cable for the upgrade process. Do not use a wireless connection when upgrading the firmware.
– Also, make sure you use a computer connected to the same router as your device. Do not perform this process through a remote connection to your device over the Internet.
– Laden Sie die Firmware herunter to your PC and then unzip it if necessary.
– Open your device’s web interface. To do this run your device’s Setup Wizard and write down the IP Address for your device then write that IP Address into your web browser and login as admin with your password for it.
– Go to MAINTENANCE > Firmware Upgrade to go to the Firmware Upgrade page. Click “Browse” and then select the firmware file you saved and unzipped on your computer in the previous steps.
– After selecting the firmware file, click Upload to start the upgrade process.
– The upgrade process will begin, and will take about 2-3 minutes to complete. Do not start or use other applications while upgrading your device’s firmware, and do not hit Stop, Back, or Reload in your web browser during the upgrade process.
– Once the upgrade process is complete, click on the Firmware Upgrade link on the left to return to the Firmware Upgrade page.
– Verify that the Current Firmware Version matches the version of the firmware you uploaded. The upgrade process is complete, and you can close your web browser.
Download