Creative Sound Blaster Tactic3D Rage Wireless Headset Firmware 1.59 für Mac OS
Dateityp: Firmware.
Betriebssystem: Mac.
Dateiname: SBTR_WL_MAC_FW_US_1_59.dmg.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Fixes:
– Support USB audio on PlayStation 4
Instructions to upgrade the Sound Blaster Tactic3D Rage USB Wireless Transmitter:
– Download the file onto your local hard disk.
– Ensure that your Sound Blaster Tactic3D Rage Wireless Transmitter is connected to your computer.
– Ensure that the Sound Blaster Tactic3D Rage Wireless Headset is removed from your computer.
– Double-click the downloaded file to uncompress it.
– Double-click <SBTR_MCFW_WL_US_TX_1_59_140721> inside the uncompressed DMG file.
– Follow the instructions on the screen.
– After the installation of the firmware is completed, unplug and plug in your transmitter and start pairing with the Sound Blaster Tactic3D Rage Wireless headset again.
WARNUNG:
Please ensure your device is connected during installation. Do not unplug your device until full installation completes. Do not restart your Mac during the firmware upgrade. Do not use a USB hub for installation.
Instructions to upgrade the Sound Blaster Tactic3D Rage Wireless Headset:
– Plug in the Sound Blaster Tactic3D Rage Wireless Headset directly to your computer. Do not connect it to a USB hub.
– Power on the Sound Blaster Tactic3D Rage Wireless Headset.
– Ensure that the Sound Blaster Tactic3D Rage USB Wireless Transmitter is removed from your computer.
– Double-click <SBTR_MCFW_WL_US_RX_1_58_A_121101> inside the uncompressed DMG file.
– To complete the installation, follow the instructions on the screen.
– After installing the firmware, re-pair your headset and the USB wireless transmitter.
Manual Pairing:
– Press and hold the Microphone Mute button on the headset for 3 seconds. The connect LED will begin to flash rapidly.
– Press and hold the Connect button on the USB wireless transmitter for 3 seconds. The Connect LED on the transmitter will begin to flash rapidly.
– When the headset and the transmitter are paired, the Connect LED on both devices will stop flashing and stabilize.
Download