Canon EOS C300 Mark II Camera Firmware 1.0.2.1.00
Dateityp: Firmware.
Betriebssystem: Windows 10, Windows 7, Windows 8, Windows 8.1.
Dateiname: c300mk2-v1021-win.zip.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
This package contains the files needed for installing Canon EOS C300 Mark II Camera Firmware 1.0.2.1.00. Wenn es installiert wurde, können durch Aktualisieren (Überschreiben) Probleme behoben, neue Funktionen hinzugefügt oder vorhandene erweitert werden. Auch wenn andere Betriebssysteme möglicherweise ebenfalls kompatibel sind, empfehlen wir, diese Version nicht auf anderen als den angegebenen Plattformen anzuwenden.
Firmware Version 1.0.2.1.00 incorporates the following correction and fixes:
– Corrects the size of the browser remote operation screen on an iOS device running iOS 9.
– Fixes a phenomenon in which the metadata of video clips recorded in RGB444 10 bit is displayed in 12 bit.
– Modifies the display when a signal to the GENLOCK terminal cannot be synchronized; the GENLOCK icon no longer disappears, but blinks instead.
IMPORTANT: Precautions for updating the firmware
– If the firmware update is not performed correctly, the camera may stop working.
– All camera settings will be reset formatted when you perform the firmware update.
– It is not possible to revert the firmware back to a previous version after you have performed the firmware update.
– Please be absolutely sure NOT to operate the camera buttons or remove the camera’s power source during the firmware update. Doing so may cause the camera to malfunction.
Installationsanleitung:
– Speichern und entpacken Sie das herunterladbare Archiv.
– Insert the SD card into the camera’s SD card slot, and close the card cover.
– Slide the Power switch to CAMERA.
– After pressing the MENU button, open the [Initialize Media] submenu.
– Select [SD Card] and then press SET.
– Select [Complete] (complate initialization) and then press SET.
– When you select [OK] and then press SET, complete initialization of the SD card will start.
– When the confirmation message appears, press SET.
– Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.
– Copy the firmware update data to the SD card
– Insert the SD card prepared into the camera’s SD card slot.
– Slide the Power switch to CAMERA.
– After pressing the MENU button, open the camera firmware submenu.
– [ System Setup] [Firmware] [Camera]
– The firmware update confirmation screen will be displayed.
– When you select [OK], the firmware update will start.
– After the update ends, the camera will restart automatically, and a firmware update completion screen will be displayed.
– When you select OK, all settings will be reset and the [Date/Time] screen will appear. Set the date/time.
– Perform Step 2, and check that the firmware version has changed to [1.0.2.1.00].
– Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.
Download