Sony KDL-32EX40B Blu-ray Player Firmware M03.R.769
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: UPDATA_M03R769M.ZIP.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Improvements over firmware version M03.R.742
– Adds the capability to play 1080/60p/50p video files produced by Sony cameras
– Improves BD-ROM playability
– Improves HDMI connectivity
Benefits provided by previous upgrades and included in version M03.R.769:
– Improves BD-ROM playability
– Resolves an issue where an unnecessary warning may be displayed when playing some discs
Anotações importantes:
– If you have not done so already, please check the current firmware version to determine if this firmware upgrade is needed for your Blu-ray Disc player (built into the TV).
– WARNING!! Please follow the upgrade instructions carefully. Failure to follow the instructions may interrupt the upgrade process and may cause the television to be unresponsive or to require repair.
– WARNING!! Do not power off the television or disconnect it from the AC power outlet. Loss of power during the installation of the firmware upgrade may cause the television to be unresponsive or to require repair.
– In order to use this upgrade method it is necessary to have the television correctly connected to an active Internet connection.
– Note: If you cannot connect the television to your Internet source, please see the Download the Firmware and Create an Upgrade Disc.
– É altamente recomendado que você imprima estas instruções para uso como referência durante o processo de instalação.
Firmware Upgrade Instructions:
– WARNING!! Please follow the upgrade instructions carefully. Failure to follow the instructions may interrupt the upgrade process and may cause the television to be unresponsive or to require repair.
– Note: The firmware upgrade process usually takes about 15 to 30 minutes, depending on system configuration and network connection.
– Connect the “LAN” terminal on the television to your Internet source using an Ethernet cable.
– Power on the television.
– If there is a disc in the player, please remove the disc.
– At the xross media bar menu, use the arrow keys on the remote control to select “Settings” – Blu-ray Disc Player” – “Network Update” and then press the ENTER button.
– The message “Perform version update?” is displayed on the television.
– Select “OK” and then press the “OK” button.
– The download process starts and the message, “Software update has started. Never turn off power while performing update.” is displayed on the television.
– The download process continues and the message, “Updating the software. The TV cannot be operated during the update.” is displayed on the television.
– WARNING!! Do not operate or power off the television until this message is displayed. Doing so may cause the television to be unresponsive or to require repair.
– When the firmware upgrade is complete the message, “The software update is complete. Please select “OK” to power off the TV.” is displayed on the television.
– Select “OK” to restart the television.
– Check the current firmware version to confirm that the upgrade has successfully installed.
– Note: If the last three digits of the version number are 769, the firmware upgrade was successful,
Download