Retrode 2 Retro Gaming Adapter Firmware 0.18d beta
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: Retrode2-v0.18d-beta.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Correções:
– Writing of GB saves (may need renaming .srm to .sav before starting some emulators like VisualBoyAdvance)
– Access to N64 Memory Paks courtesy of Wannado (not all emulators support this)
– Fixed SMS SRAM cluster bug found by Wannado – thanks!
– Minor improvements and thorough testing of recently added features
Install new firmware version:
– Connect the Retrode as usual.
– Install FLIP.
– Enter Device Firmware Update (DFU) mode as follows: Hold down the HWB button. Then press and release the RESET button while still holding down HWB. Finally, let go of HWB as well. (On Retrode 1, a pair of toothpicks may come in handy to operate the buttons.)
– Windows will now recognize a new device. When asked for drivers, direct it to the “usb” subfolder in your FLIP installation directory.
– Go to the Windows device manager and look for a mysterious device called “Jungo” or “AT90USB646″ or similar. If there is none, repeat steps 3 and 4.
– Start FLIP.
– In the “Device” menu, click on “Select…”, or press Ctrl+S.
– Select the entry “AT90USB646″ from the list.
– Press Ctrl+U to open the USB connection.
– Load the firmware hex file (Ctrl+L). Attention: apparently, FLIP cannot deal with file paths that contain special characters, such as “é” or “Ô.
– Hit the “Run” button on the lower left.
– When the programming is done, hit the RESET button or cycle the USB connection. As tempting as it may seem, do NOT hit the FLIP button “Start Application”.
Download