Pioneer DJM-TOUR1 Mixer Firmware 2.00
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: djm-tour1_200.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Ver.2.00 Update
[IMPROVED]
– Sound quality enhanced by improving internal digital signal dithering process (DSP).
– AUTO, TAP and BEAT found on the main display visually improved.
[FIXED]
– Incorrect audio output when changing Beat FX or FX channels.
– Channel level indicator was lit when launching.
– Switching noise occurred when changing USB Output Level.
Update Procedures:
1. How to enter the Update mode. Turn on the power while pressing both [ON/OFF (BEAT FX)] and [MID (FX FREQUENCY)] buttons.
– Please disconnect all devices and cables from USB, LINK and INTERNET terminals.
2. Check the current version of your firmware on the display. If current version is displayed as “xxx”, you do not need the update process because it is the latest firmware.
3. Insert the USB flash drive containing the firmware files into the USB port. The update process will begin and the progress bar and percentage will be displayed on the screen.
– Do not turn the power off or disconnect the USB flash drive during the update.
– The update will be completed in approximately 9 minutes.
4. When the message [COMPLETE] appears, the update is completed. Please turn the power off and disconnect the USB flash drive.
If the firmware update will not start or an error occurred during the firmware update, the downloaded file might be broken. Please download the firmware again. If you still unable to complete the update, it could be due to the compatibility with your USB device. Please try a different USB device.
Download